Best Sandblasters 2021

Buying a sandblaster can prove difficult if you have no idea of what to look for. Reading this guide however will solve that, in this guide, we will review the best sandblasters to buy. If you want to buy a sandblaster, you should read through this guide

Sandblasting can be done mainly to either remove surface finishes or to impart a smooth surface without taking much effort to scrape and smooth them down with other tools

Types Of Sandblasters

In general, there are three different and primary types of sandblasters present. They are as follows:

  • Siphon Fed Sandblasters

They contain a hose associated with the air compressor at the bottom of the guns handle and another hose associated with a media reservoir at the lower some portion of the gun’s barrel.

At the point when the gun is triggered, the compacted air draws blasting media from the reservoir into the gun’s barrel through suction and afterward, it’s fired.

  • Pressure Fed Sandblasters

These are large canisters containing both pressurized air and blasting media. They have one hose where both the packed air and the abrasive pass through once the gun is triggered.

  • Gravity Fed Sandblasters

This type of sandblasters comes with a handheld pressure gun that is coupled to an air compressor using a hose. On top of the product, a reservoir of the handheld gun directly installed.

Now, in case the gun is triggered, all the abrasives from the reservoir attached flow in the gun’s barrel. Then the high-velocity air blasted out all the abrasives through the nozzle.

SANDBLASTERS BUYER’S GUIDE

Air Pressure

The air pressure rating of any given sandblaster is one of the most important things to check before buying one. This is simply due to the reason that you need a minimum air pressure before you can use a sandblaster.

Generally, this air pressure rating is either given as 90 PSI or in a range of 60 PSI to 125 PSI. If your sandblaster has a pressure rating of 120 PSI, then it needs to have that air pressure inside your air compressor to work properly.

Generally, a higher air pressure rating of 120 PSI will offer better performance than a 90 PSI air pressure.

Air Flow

You should also check the airflow rating of a sandblaster before buying one. Unlike the air pressure rating, it simply tells you the amount of air being used by a sandblaster. This rating is given in CFM or cubic feet per minute, where a higher rating results in more air being used.

While some sandblasters have an airflow rating of 7 CFM, more powerful models will have an airflow rating of 12 CFM. Although, as you would expect, you also need a more powerful air compressor for using such sandblasters.

Portability

Since these sandblasters do jobs containing heavy work, the equipment should be portable enough for comfort. Going for a portable sandblaster is considered to be a wise choice as regardless of the work at home or on an industrial level, they offer you good ease of use.

Weight

To increase portability and ease of use, you should always go for a lighter sandblaster. Maybe weight issues can be regarded if you are aiming at small scale usage, but it is always better when the product is lightweight so that it could aid you in handling it well and doing work more efficiently.

Build

Sandblasters are made for rougher use so it must be strong enough to take hits and dents. While aiming for lightweight properties do not compromise on the build as strength is important too. You can opt for metal or any other equally durable material for the same.

User friendly

As sandblasting is a heavy-duty work you must be able to handle it easily or else you may grow tired soon enough. There are a lot of places your sandblaster may need to reach into and for this property, handheld sandblasters offer you more comfort as it can be easily operated and also is very portable. And make sure all the settings and instructions are easy to follow.

Budget

Always keep a budget before purchasing and make sure that you find one fitting all the features you had in mind. But according to its warranty, durability, and also the frequency with which you may be using the equipment. Look for the one that offers you a better number of features than all others.

Safety

Handling a sandblaster can be dangerous and you need to take some safety precautions additional to those that may come fitted with the product.

The proper gear includes gloves, helmets, masks, safety goggles, boots and make sure your body is well covered so that no unwanted particles get in. Along with that operate the machine with caution.

BEST SANDBLASTERS

NAMES FEATURES WHERE TO BUY
SpeedBlaster Gravity Feed Media Blaster

B000IHUQ5E

Air pressure rating of 60 PSI to 120 PSI

Airflow rating of 12 CFM

2-year long warranty

Excellent build quality for peace of mind

GET IT ON AMAZON
Generic Sandblaster Air Siphon Feed Blast Gun

B00GVHB7ZI

Siphon Feed Blast Gun

Die-cast aluminum, Aluminum pistol grip, Gun weight: .55lbs

4 ceramic nozzles: 4mm, 5mm, 6mm, and 7mm

Minimum air requirement: 6 CFM at 80 PSI

GET IT ON AMAZON
Lematec Sandblaster Portable Media Blaster AS118-BL

B075SXPC2H

Air pressure rating of 60 PSI to 120 PSI

Airflow rating of 12 CFM

1-year long warranty

Comes as a kit with multiple accessories

GET IT ON AMAZON
Campbell Hausfeld AT122601AV

B0007D30DO

Removes rust, scale and paint from parts and small equipment

Leaves a satin finish ready for paint or further prep

GET IT ON AMAZON
Jewboer Air Sand Blaster Kit

B07G468RC9

Durable

Strong build

Handy

GET IT ON AMAZON
Neiko 30068A Abrasive Air Sand Blaster Handheld Gun

B0785FXQQP

Both gravity feed and siphon feed blaster

10-foot hose

Money back policy

GET IT ON AMAZON
Premium Sandblaster Sand Blaster Gun Kit

B07QX2RTS8

Air pressure rating of 60 PSI to 120 PSI

Airflow rating of 12 CFM

1-year long warranty

Great build quality for peace of mind

GET IT ON AMAZON
Shop Fox M1114 Benchtop Sandblaster

B005W1BQA0

Abrasive capacity: 10 lbs

Air pressure requirement: 60-100 PSI

Overall size: 24-1/2″ x 21-1/8″ x 19-1/2″

Approximate shipping weight: 50 lbs.

GET IT ON AMAZON
MH Amazon Abrasive Sand Blaster Cabinet

B00U33I934

Abrasive Sand Blaster Cabinet

Operate Air: 80PSI / 5 CFM; All-steel cabinet with plexiglass viewing lid

Uses silicon sand, glass beads or aluminum oxide to clean or polish material

GET IT ON AMAZON
OEMTOOLS 24815 Bench Blast Cabinet

B00GXMF0V8

Easily Remove Paint, Rust, and Oxidation

This Bench Top Blast Cabinet Has a Built-In Exhaust for Smaller Blast Cleaning Jobs

Fits On the End of Any Bench or Cabinet

GET IT ON AMAZON

SpeedBlaster Gravity Feed Media Blaster

B000IHUQ5E

Having a build of sturdy and durable plastic that can endure through any kind of rough uses, this model can be used both at home or in your workshop. The reservoir tank stores the media and the grit size is limited to 14 grit or else it might clog the system. It has an aluminum ceramic nozzle and a valve to operate the control the flow of media through the nozzle enabling you to operate in hard to reach places. Made in America this model has an operating pressure of 60 – 125 psi at 12 CFI. This model is however limited for small projects and can’t be used in your workshops for bigger jobs.

PROS CONS
Aluminum ceramic nozzle Particle size is limited to 14 grit
A controlled flow of media Apt for small projects only
Hard plastic build

Generic Sandblaster Air Siphon Feed Blast Gun

B00GVHB7ZI

The Generic Sandblaster Air Siphon Feed Blast Gun features a full die-cast aluminum construction. Die-cast aluminum is very durable, and it can withstand grazes from the rough media.

The gun weighs 0.55lbs only, which makes it light to work with. You can blast all day without getting your hands worked out. This Generic Sandblaster requires a minimum air supply of 6CFM at 80PSI for it to perform as needed.

The nozzles of any sandblaster always play a role in how well it performs. The generic sandblaster comes with four Ceramic nozzles to ensure that it works at its best. The nozzles measure 4mm, 5mm, 6mm, and 7mm. The ceramic nozzles can withstand highly pressurized abrasives. This makes it durable and able to work at its best.

PROS CONS
Wear and tear resistance High replacement costs.
High durability
Anti-erosion properties

 

Lematec Sandblaster Portable Media Blaster AS118-BL

B075SXPC2H

The Le Lematec AS118 sandblaster is present in the 1st position in this as it is one of the most powerful options mentioned in this article. It comes with a high air pressure rating of 60 PSI to 125 PSI. When combined with its 12 CFM airflow rating, this sandblaster should be more than enough for most users in terms of performance.

You get a complete kit with this sandblaster that includes various accessories. As you would expect, these accessories make the overall user experience quite better. Another great thing about this sandblaster is that it comes with a 1-year long warranty that is always great to have. Although the build quality is just average and could have been better.

PROS CONS
Decent value for money Slightly on the larger side
Highly powerful sandblaster model Average build quality
1-year warranty for peace of mind

Campbell Hausfeld AT122601AV

B0007D30DO

The Campbell Hausfeld AT122601AV is a siphon sandblaster. This means that the blasting material is fed to the blaster from below the mixing chamber.

It comes with a package containing a 10ft hose, a sandblaster gun, and a wrench. The tube is of high quality and long enough to allow easy mobility when working.

The gun is ergonomically designed, making work more comfortable. The gun can handle working with a range of many abrasive materials, which makes it adaptable and versatile. It has an easy to grasp the handle, which makes it easier to spray the abrasive material. The gun is small enough for easier access to hard to reach places.

PROS CONS
High-efficiency levels Unsuitable for hard materials
A multi-purpose machine
Less expensive

Jewboer Air Sand Blaster Kit

B07G468RC9

This is a siphon sandblaster having both steel and ceramic nozzle with a high performance along with the portability feature. The entire model is made out of casting aluminum and hence imparts good strength and durability. The comfortable grip on the pistol handle ensures ease of use and it has liquid and air cleaning of parts. Using this sandblaster you can do works on glass, vehicles, bricks, walls, etc. It works between 60 – 120 psi at 12 CFM and provides a good force on all sorts of work at both homes and in the industry.

PROS CONS
Affordable price Fit for small jobs
Awesome look and durability
Multi-purpose use

Neiko 30068A Abrasive Air Sand Blaster Handheld Gun

B0785FXQQP

The Neiko 30068A has a great combination of these features to make an exceptional blaster for DIY and some professional projects.

It is constructed from high-quality ABS material which is durable and robust. It also makes the blaster lighter for easier portability and use.

The handle is ergonomic with a good grip. This makes it easier and comfortable to work with. The whole gun is also ergonomically designed to reach into hard to access places to perform a thorough cleaning.

PROS CONS
Pressurized acceleration Expertise required
Perfect for different needs
Acceptability of multiple media

Premium Sandblaster Sand Blaster Gun Kit

B07QX2RTS8

With this unit, eliminating things like paint, corrosion, spots, rust, and various other debris is simple. It relies on lasting abrasive media and will relay high quality and professional results. It’s effortless to use and will prove effective even for a novice. This is due to the basic design as well as lightweight. Moreover, It supports different blasting media. These include walnut shells, steel grit, aluminum oxide, glass beads, and silicon carbide. Loading the compounds is pretty easy, and controlling the gun is not a problem. And thanks to the long 10-foot hose, moving around with the unit isn’t a challenge.

We love the different nozzle dimensions that deal with differing requirements. What’s even more, it’s a mobile piece, and carrying and handling are simple. Moreover, it is compatible with the majority of typical air compressor systems in the market. Connect the blasting kit to the machine is simple and also easy. It delivers consistent performance and likewise is easy to clean.

PROS CONS
Money back policy May need an expensive compressor for better performance
Both gravity feed and siphon feed blaster
10-foot hose

 

Shop Fox M1114 Benchtop Sandblaster

B005W1BQA0

This blast cabinet is great for preparing small parts. It includes a blasting gun with ceramic tips, a built-in fluorescent lamp, and sealed glove ports.

PROS CONS
High quality Slow in working
High durability Cumbersome to move
Multi-purpose

MH Amazon Abrasive Sand Blaster Cabinet

B00U33I934

The MH Amazon Abrasive Sand Blaster Cabinet is one such product that has a small and compact-sized body. The dimensions are around 23 x 19 x 19 inches that became very helpful for us to install the product. Because of the compact size, the product seemed to be quite light in weight. While testing the body construction, we found it to have a proper steel based frame. Even in touch with paint or water, the anti-corrosion coating on the cabinet works perfectly when it comes to regular usage.

PROS CONS
Dust collector port The power cord is short
Compact in size
Uses silicon sand

OEMTOOLS 24815 Bench Blast Cabinet

B00GXMF0V8

the OEMTOOLS 24815 Bench Blast Cabinet, we were quite surprised by the design and the effectiveness. The sandblasting cabinet features a benchtop design that can fit into any space. Just like most of the people, we thought that the compact body of the product will mean compact size inside. But it was amazingly surprising as we found ample space inside. Even while testing the product in a large area, it had enough space to remove pain, rust as well as oxidation.

PROS CONS
Replaceable Ceramic Tip in Nozzle Expensive
Replaceable Air Filter
Multiple applicability
Quality finishing
Fits On the End of Any Bench

CONCLUSION

We thank you for taking the time to go over the sandblasting cabinet guide and reviews. We aimed to help you out in choosing one as per your needs. A sandblasting cabinet is a must buy in case you want to remove all those stubborn stains from the products. And if you are still confused, then we suggest you go through the buyer’s guide, you will have a better understanding if you do.