Best Bandsaws of 2024

Best Bandsaws of 2024

If you are searching for the best bandsaw out there, you are at the right place. Bandsaws are important tools for every workshop, they are a must have, so having the best bandsaw in your workshop can be the difference in the quality of work you produce. This post is aimed at showing the best bandsaws for you. Read through to find the best bandsaws. o you make the right decisions in getting the right bandsaws for you.


This guide seeks to give you all the important information you need so that you can make the band saw decision that’s right for you. The All Important Application Analysis

First of all you need to have a clear understanding for yourself of how you’ll be using your band saw. Will you be doing lots of resawing? You need higher horsepower and a wider blade width capacity among other things. How about scroll work? Horsepower doesn’t matter quite as much here (unless you’re working with thick stock) as allowance for a narrower blade.

Will you be using your band saw five times a week or five times an hour? This will give you an idea of how much you need to spend on the motor and whether you need a bench top or floor model.

Once you’ve answered the application questions for yourself you can begin to dig a little deeper into other aspects of a band saw.

Bench Top vs. Floor Model

As a very general rule, bench top models belong in non-professional wood shops.

Power hobbyists – those woodworkers who spend every waking minute in the wood shop – will point to the floor model band saw in their shop and disagree heartily.

Your bench top band saws are made to literally sit on your bench top or to be bolted onto a stand. They are compact and portable and ideal for light scroll cutting.

Floor models are more stable and more powerful and ideal for heavy rip sawing and decorative work on thick stock wood. Their higher horsepower typically keeps the blade from getting stuck and burning the wood you’re cutting.

Throat Capacity

Another reason it’s important that you know your desired application is throat capacity – that’s the distance between the blade and the frame and it determines the maximum width of the saw’s ability to cut.

The greater the throat capacity the wider your cuts and larger pieces for scrolling.

Blade Width

It’s typical that band saws accept the narrower 1/8″ blades for creating scroll work. If resawing is important to you then you’ve got to make sure you’re getting a saw that accepts wider blades, as they flex less and enable more accurate, faster cuts through thicker stock.

If you’re buying your band saw to make scroll cuts only then the acceptance of a wider blade should not be a consideration… then again in a few months you might be looking for new ways to resaw your lumber. Again, that’s why the initial Application Analysis is so important.

A note on blades: TPI stands for “teeth per inch.” A higher teeth per inch ratio means that blades will cut more slowly, but more cleanly. That’s right – making them ideal for scroll work. A lower TPI means that blades will cut more quickly but leave more of a mark, suiting them for ripping.

The Possibility for Expansion through Accessories

There are a number of potential accessories for every band saw. Some more than others though. When you know your applications you’ll have a better idea of which accessories you’re going to need and which you don’t need to allow for in your model of choice.

That said, it’s a good idea to err on the side of MORE possible accessories than fewer.

Some accessories include circle cutting attachments for cutting perfect circles, tilting tables for beveled cuts, miter gauges, rip fences and even height extenders for cutting thicker wood.

Band Saw vs. a Jig Saw

The main functional difference between the two types of saws are that the band saws have blades that cut in one continuous loop, while jig saws go up and down.

It’s generally held that the band saw is the superior saw due to the vibration of the up and down motion of the jig saw. Since the band saw blade only pulls in one direction there’s no chance of upward thrust on the piece that could throw the cut out of true.

That said, the ability to change blades and even the extreme narrowness of some jig saw blades makes this question moot for certain types of highly delicate work.

Wrapping it up

As with any woodworking tool purchase you’re more likely to make a sound decision if you know exactly how you’ll be using it ahead of time. Having a good idea of how your projects for the next several months will help ensure that you’re getting the right tool for the job.


  2. Grizzly G0555LX Deluxe
  3. WEN 3962
  4. Rikon 10-305
  5. Shop Fox W1706
  6. Delta 28-400 Band Saw
  7. WEN 3959 Band Saw
  8. DEWALT Portable Band Saw
  9. RIKON Power Tools 10-326 14″ Deluxe Bandsaw
  10. Laguna Tools MBAND144200


Power – 1 1/4HP motor

Table size – 15 x 15 inches

Wheel diameter – 14 inches

Blade speed – 1500, 3000 FPM

Cutting capacity – 13-1/2 x 12 inches

Grizzly G0555LX Deluxe


Max cutting height: 6″

Table size: 14″ x 14″

Wheel type: Computer-Balanced Cast Iron

Blade size: 92-1/2″ – 93-1/2″ (1/8″ – 3/4″ wide)

Quick blade change: Yes

WEN 3962


5 amp motor creates cuts up to six inches deep and 9-3/4 inches wide

Uses 72-inch blades anywhere from 1/8 to 1/2 inches in size

Spacious 14-1/8 x 12-1/2 inch cast aluminum work table bevels up to 45 degrees

Operates at two speeds of either 1520 or 2620 FPM

Rikon 10-305


Table size: 14″ x 14″ x 1-1/2″

Table height above floor: 43″

Cutting capacity (throat): 13-1/2″

Maximum cutting height: 6″

Table tilt: 45° right, 10° left

Shop Fox W1706


4-5/8″ Re-Saw Capacity

Edge Facing Thrust Bearings

Large Cast Iron Table

Safety Paddle Switch

Includes 2″ Tall Fence

2-1/2″ (O.D.) Dust Port

Delta 28-400 Band Saw


Precision ball bearing upper and lower blade guides ensure consistent tracking for accurate cutting performance

Oversized table insert provides visibility when adjusting lower blade guides

Larger insert for visibility when changing lower guide settings

Includes 4″ integral dust port, steel stand and a 93-1/2″ wood-cutting blade

UL Listed

WEN 3959 Band Saw


5 amp motor rotates the blade up to 2500 feet per minute

Create cuts up to 3-1/2 inches deep and 9 inches wide

Uses 59-1/2 inch blades anywhere from 1/8 to 3/8 inches in size

Spacious 12-1/4 x 11-7/8 inch work table bevels up to 45 degrees

DEWALT Portable Band Saw


10 amp motor designed with power to withstand any jobsite application

5″ deep cut capacity for rectangular stock (5 X 4-3/4″ for round)

Serviceable steel shroud and rubber bumpers allow guards to withstand jobsite abuse without damage

LED sight light allows the user to see cut line in dark jobsite environment

Integrated hang hook allows user to hang the saw without damaging front handle or casting

RIKON Power Tools 10-326 14″ Deluxe Bandsaw


13″ Cutting Capacity

Patented – Spring Loaded Tool-less Guide System

Patented – Quick Adjust Fence System With 6″ Tall Rip Fence

Patented – Quick Lock Cast Iron Trunnion System

2 Speeds 1,445 / 2,950 FT / MIN.

Large Cast Iron Table

Balanced Cast Iron Wheels

Laguna Tools MBAND144200


Weight: 340 pounds

Motor: 3 HP

Blade length: 125″




The design is well-done and one can clearly see that the engineers have paid attention to the overall stability and balance of the machine. While some other models tend to wobble and lose integrity over time, this particular one is made to last for a long time. The worktable is spacious enough to withstand pressure and allow you to cut big pieces of wood without an issue. Therefore, if you’re planning on tackling a demanding project, this bandsaw might be a good solution.

The thing that’s lacking is a fence. While it can be bought separately, it’s not something many people are too happy about. The reason is pretty simple – it significantly increases the final price of your investment. If you’re on a tight and strict budget, this might turn into a serious issue.

Variety of useful features The fence is not included
Reliable machine Somewhat pricey
High accuracy


Grizzly G0555LX Deluxe


The G0555LX includes computer-balanced cast-iron wheels, rack-and-pinion guide post adjustment for the upper blade guides, and a sturdy T-shaped fence design.

Computer-balanced cast-iron wheels with urethane tires none
Lockable switch with included padlock
Sturdy T-shape fence design
4″ Dust port

WEN 3962


The WEN 3962 does give you not only the value of your money but also makes the best cuts. It features a 45-degree tiltable table that makes it a highly adjustable machine that makes you work comfortably in your current project.

It is easy to assemble. Replacing the blade is not easy.
Includes useful accessorie The blade and tilt are difficult to adjust and setup.
Very easy to set up. Users had trouble centering the blade.
LED headlight.
Very perfect size to use.
Triple filter dust port.
Dual speed setting.

Rikon 10-305


10” Bandsaw #10-305 is a favorite of woodworkers and hobbyists that do not require large cutting capacity and power for their projects, or have limited shop space for a larger size bandsaw. Includes features for easy operation – tilting 0-45° table, rip fence, large blade tension knob, dust port for shop vacuum hookup, and safety paddle on/off switch.

Large cast-iron work table of 13-3/4 x 12-1/2 inches can accommodate fairly large material. It provides great maneuverability when working with long and thick stock. Motor is only rated at 4.5-Amp and delivers 1/3 HP. This is not the most powerful model, but despite that it gets the job done and can go through wood, plastic and even soft metal quite easily.
High-quality and solid steel frame construction. Durable and will last a long time.
Table can be tilted to the right for more versatility.
Decent blade speed of 2780 FT/MIN allows you to cut through material fast and easily.

Shop Fox W1706


Shop Fox’s entry-level bandsaw has many features found on much larger and more expensive machines, such as extruded aluminum fence and rails, quick release blade tension, miter gauge, upper and lower ball bearing blade guides, enclosed cabinet stand, hinged wheel covers, 4″ dust port, 1 HP motor, cast iron frame and table.

Very good band saw. The trunnion knobs are very hard to put on as the attaching bolts are free-floating on the table.
Easy to set up. The rip fence has a tendency to not lock down solidly. So the user can use the clamps and an auxiliary fence at the time of resewing.
Very good quality. Should have a light for cutting.
Easy to use.
Cast iron wheels with tires already installed

Delta 28-400 Band Saw


This 14″ heavy duty band saw from Delta Machinery features a Dual Voltage (115/230V) TEFC motor for powering through the most rigorous re-sawing applications needed for any woodworking project. The two speed pulley system provides the flexibility needed for cutting a variety of materials and the oversized cast iron table provides great support for larger cutting operations.

Good power No miter gauge
High quality No rip fence

WEN 3959 Band Saw


The WEN 9-Inch Benchtop Band Saw attacks boards with cuts up to 3-1/2 inches deep and 9 inches wide. The 2.5-amp motor rotates the included 1/4-inch blade at up to 2500 feet per minute. The design of this saw uses 59-1/2 inch blades anywhere from 1/8 to 3/8 inches in width for both intricate and powerful cuts. The spacious work table measures in at 12-1/4 x 11-7/8 inches in size and can be beveled up to 45 degrees

It is quite affordable Not enough power for big tasks
Generous table size Loose miter gauge
Good set of accessories
Comes with a 2500 FPM
It has 2.5 Amp motor 

DEWALT Portable Band Saw


The DWM120 Deep Cut Band Saw has a powerful 10 Amp motor for operating various jobsite applications and cutting rectangular stock up to 5 inches deep. Variable speed dial allows user to vary speed for specific materials and various applications.

features an LED guide light for accurate cutting. Doesn’t come with battery or charger.
At 10 pounds, it’s the lightest option on this list.
Comes with three replacement blades.

RIKON Power Tools 10-326 14″ Deluxe Bandsaw


14” Bandsaw #10-326 is RIKON’s newest model with many Patented features that professionals will enjoy – including spring-loaded tool-less blade quides, quick-adjust fence system and quick-lock trunnion table

angling system, plus, a quick release blade tension lever, large adjustment handles, hinged safety blade guard with sight window, high work table height, and storage cabinet base

Excellent resaw capabilities Lacks a miter gauge
Adjustable ball bearing blade guides Low quality blade
Extra-tall rip fence

Laguna Tools MBAND144200


The Laguna Tools MBAND144200 is one of the most rugged 14-inch bandsaws on the market. The attention to detail that went into the redesign and remodeling of this model is phenomenal, but it comes at a hefty price.

Excellent performance Heavy
Premium accessories Expensive
High resaw capacity
Powerful motor


We have come to the end of this review, with so many benefits to gain, having your personal band saw. These tools are a must have. They are reliable, and sturdy. You have no reason to fear going for any of these band saws

Discover your pathway to success with our comprehensive resources on international scholarships, visas, travel, and a wide range of professional tools and equipment. Empowering you to build your future, one tool at a time. Visit our website for more information.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top