Best Jointers of 2024

This review is focused on showing the best jointers money can buy, so if you are interested in getting one for your workshop, you are at the right place. There are so many jointers out there, but only a few can do a great job. In this review, we will show you the jointers that will do a great job. Read through to find out for yourself the best jointers


A jointer is a major piece of machinery for your shop and one that you will be depending on for the first steps in your project.

A jointer that delivers accurate results means you have wood that fit together perfectly without any problems, and that accuracy will save you a ton of time and effort for the next tasks after cutting the wood to size.

In general, there are four types or variants of jointers available on the market.

These are the closed stand jointers, open stand jointers, benchtop jointers, and tabletop jointers. Each of these types of jointers has their own pros and cons, and picking the right type for your shop depends on several factors – the space you have in your shop, the size of wood you will usually be working with, and of course, your budget.

Things to Consider When Comparing Jointers

Now that you have a type of jointer in mind, it’s time to put them side to side to see how they stack – a jointer will be a vital part of your shop, and you need to consider your choices very well in what is likely a significant investment.

In this part of the buying guide, each feature to look for will be discussed thoroughly and why you should consider them when buying your jointer.

Table Width and Cutting Depth

This refers to the jointer’s ability to cut different proportions of wood and timbers. Bed width usually dictates the price of the whole jointer because the bigger it is, the more expensive the whole jointers are.

Jointers need to have beds that are accurately oriented to the knife within fractions of a millimeter, and the bigger the bed, the tighter the tolerances the manufacturer needs to account for.

It is advisable that six to eight inches should suffice for most people but for those who are experienced in using jointers and they are always flattening thicker and larger timbers and woods.

Beyond eight inches should suffice for their needs because it can already do the job with ease and effectivity.

Cutting depth, on the other hand, affects how many passes the user has to run on the wood to achieve the desired results. For instance, a jointer with 5/8 cutting depth requires the wood to be pushed across two times or more because the blades only dig in so deep.

1/2 or 3/4-inch cutting depths are usually the standard for the jointers that can surface the wood in just one pass.

Fences, Bases, and Guides

Fences are crucial in keeping the wood stock aligned and straight while it is being pushed along the table. The fences and bases of every jointer should always be adjustable so that the user can flatten the wood on any desired angle.

This offers versatility for the user since it would be easier to make the same cut along the same angles while running several wood pieces across multiple times. Adjustable fences are also a big help in securing the wood in place with clamps as well If you need to work on it with your other handheld tools.


Many jointers usually come with electric motors rated at 1 horsepower. 1 hp is often sufficient to trim and cut softwood with ease, even to the maximum cutting depth.

On the other hand, there are some jointers with more powerful motors rated at more than 1 horsepower, as well.

Dust Collection Features

Dust collection features are an important part of a jointer, given the sheer amount of dust that every cut can produce. A dusty workshop can be the cause of accidents, and long-term exposure to dust can lead to respiratory ailments and other problems as well.

This is why jointers must posses dust collection capability features so that the user does not have to worry about inhaling dust and the issues that can bring.

The bigger the dust bin of the jointer is, the better since it can store much more sawdust that can save the user time from throwing it all out


Blades on jointers are not usually a big concern at first since most if not all jointers already come with good cutterhead blades out of the box.

Keep in mind, though, that jointer blades wear down over time especially if the jointer is being used very frequently.

When changing blades, it is advisable to use curved ones instead of straight blades because straight blades has the risk to snap and usually dulls a lot faster compared to curved blades.

Adjustable Tables

Aside from determining the right size of the table for you, the table must also be adjustable for your needs. Adjustable tables can help the user flatten wood in different angles with ease which would reflect on the quality of the cut


Jointers are usually expensive, and especially so in the case of closed stand and tabletop jointers. As much as possible, though, you need to avoid buying jointers that are the cheapest in their category – more often than not, their build quality is not as good and they will probably end up breaking down a lot faster.

To ensure the quality of your jointer, you can choose from mid-range models to avoid spending too much money on the premium features while covering the basics rather well.


  2. Delta Power Tools 37-071 6 Inch
  3. Powermatic 1610086K 8-inch
  4. JET JJP-12 12-Inch Jointer Planer Combo
  5. JET 708457DXK JJ-6CSDX
  6. Powermatic 54A Deluxe 6-Inch
  7. Powermatic Model PJ882 8-Inch
  8. Grizzly Industrial G0813-6″ x 48″ Jointer
  9. Shop Fox W1829
  10. Craftsman CMEW020


Built-in cutter head lock facilitates knife replacement and adjustment

Extra-large table provides ample work support and surfacing stock up to a full 6-in wide

Center-mounted fence gives needed support throughout the cut for accurate edge jointing

Ideal for edging, flattening, and face jointing

Independently certified to applicable standards

Delta Power Tools 37-071 6 Inch


Up to 1/8″ depth of cut

Aluminum cutterhead with two knives. Simple jackscrew arrangement offers easy adjustment when changing knives

Built-in dust blower ejects chips efficiently and virtually eliminates clogged dust chutes

Includes a pair of push blocks for easily and safely moving material through the jointer

Powermatic 1610086K 8-inch


Powermatic 8-inch jointer comes with fence

Provides true squared edges for professional-looking work

Stationary jointer’s 2hp motor delivers a top speed of 7,000 rpm

Long table helps to balance larger pieces

Powermatic jointer’s non-marring fence insert prevents damage to the table

JET JJP-12 12-Inch Jointer Planer Combo


Three high-speed steel knife cutter head provides rapid cutting and a superior finish

Parallelogram design keeps the table close to the cutterhead for improved finish and allows for precise depth of cut adjustments

Extra large aluminum extruded fence with centered controls for quick adjustments

Extrmemly quick changeover between jointing and planing functions. Fence does not need to be removed



Three high-speed steel quick change knives provide rapid cutting, a superior finish and eliminates the need for a knife setting gauge

Extra-long heavy-duty cast iron infeed and outfeed tables with precision machined finish

Built-in rabbeting ledge adds versatility

Powermatic 54A Deluxe 6-Inch


The cutterhead features three auto-set knives that automatically align themselves in the cutterhead

66″ long adjustable infeed and outfeed tables provide more working surface

Fine/quick adjustment lever on infeed table for precision cuts

Extra-long 38″ two-way tilting fence with positive stops provides quick positioning for 90° or bevel cuts

Enlarged sheet metal stand provides a sturdy base

Powermatic Model PJ882 8-Inch


Powermatic 8-inch jointer comes with open-end wrench, 3 hex wrenches, knife gauge, 2 screwdrivers, 5 knife inserts

Shaves off excess material to create flat surfaces

Parallelogram jointer’s 2 hp motor achieves a top speed of 7,000 rpm

Fence tilts 45 degrees in both directions

Positive stops at 45, 90 and -45 degrees

Powermatic jointer’s 82-inch table provides easy balance

Grizzly Industrial G0813-6″ x 48″ Jointer


Cutterhead diameter: 2-1/2″

Cutterhead type: 3-knife

Knife Size: 6″ x 1″ x 1/8″

Cutterhead speed: 5000 RPM

Table size: 6-5/8″ x 47-3/8″

Shop Fox W1829


Motor: 1-1/2 HP 110V 12A universal.

width of cut: 6-1/8″

workpiece length: 8″

depth of cut (per pass): 1/8″

Cutterhead speed: 10000 RPM.

Craftsman CMEW020









PORTER-CABLE® PC160JT Jointer features a variable speed range of 6,000 to 11,000 RPM and cutter head speed of 12,000 to 22,000 cuts per minute, allowing selection correct speed for material’s size and hardness. Two-knife cutter head, with jackscrew knife leveling arrangement and built-in cutter head lock, allows for easy knife replacement and adjustment. Jointer is ideal for edging, flattening, or face jointing.

Variable speed Goes out of alignment
Good purchase protection Hard to calibrate
Solid warranty

Delta Power Tools 37-071 6 Inch


The 6″ Jointer by Delta Machinery will perform clean, precise cuts every time. A heavy duty cast iron fence provides accurate jointing. With a precision-machined table and fence you’ll get to experience long lasting accuracy. Cut up to a max width of 6″ and enjoy up to 1/8″ depth of cut. The 37-071 Jointer comes with an impressive 5-year Warranty.

Simple fence adjust system with adjustable positive stops at 90˚ and 45˚ in and out Adjusting the fence takes some time
Durable cast iron construction increases weight providing stability and reducing vibration Gets outperformed by higher quality models
Heavy duty, cast iron fence support system for accurate jointing
Precision-machining of the table and fence ensures long term accuracy

Powermatic 1610086K 8-inch


The 60HH 8-Inch Jointer, 2HP 1Ph 230V, Helical Head, from Powermatic, helps you to square away the corners of boards for more uniform results at the end of your project. It has a powerful 2hp motor that runs at a maximum speed of 7,000 rpm to make quick work of tough pieces.

This Powermatic 8-inch jointer has an extended table to help you balance longer pieces with more stability. A non-marring fence insert protects the table from damage. The Powermatic jointer has a helical cutting head with carbide inserts, which delivers a finer finish and provides quiet and smooth operation. Its adjustment lever allows you to make precise adjustments to the cutting depth for precisely matching one board to the next.

Powerful It’s pricey
Large capacity
Helical cutter head
Decent warranty

JET JJP-12 12-Inch Jointer Planer Combo


This versatile machine features an extra-large aluminum extruded fence with centered controls for quick adjustments, a built-in dust chute capable of handling both planing and jointing operations, and a powerful 3-horsepower induction motor that can handle the toughest lumber. A heavy-duty, fully welded steel base cabinet houses the motor and the planer table mechanism, while providing solid mounting for the associated controls and support for the jointer table and fence assemblies.

It’s a jointer planer combo Not meant for production scale
Function Pricey
5-year warranty



If you are looking for a Jointer that squares your wood, every time; look no further. The JET 6″ Long Bed Jointer offers one of the longest working surfaces in its’ class. With the addition of an exclusive auto-set quick change knife system you can replace or change all three blades in a fraction of the time other machines take. Make the JET 6″ Long Bed Jointer the next high performance machine for your shop.

5-year limited warranty Mediocre customer support
Excellent price to performance No helical cutter head

Powermatic 54A Deluxe 6-Inch


The 6″ Jointer features three auto-set knives that align themselves in the cutterhead for rapid knife changes. Oversized infeed/outfeed tables are mounted on dovetailed ways and have a built-in rabbeting ledge. The fence is 38″ in length, with positive stops at 90° and 45° right and left. The fine/quick adjustment lever on the infeed table offers quick set-ups with precision controlled depth of cut

1HP motor offers plenty of power Need more than one person to complete the assembly
Built-in ledge for 1/2″ rabbeting capacity Some think the paint job could use some work
Fence controls are center-mounted for convenience

Powermatic Model PJ882 8-Inch


The PJ882 Jointer, 2HP 1Ph 230V, from Powermatic, helps create a flat surface on your boards. It sports a 2 hp motor that can turn the cutterhead at up to 7,000 rpm for faster task completion. This Powermatic 8-inch jointer’s fence can tilt up to 45 degrees in either direction and has positive stops at the most commonly used angles for consistency. The table is 82 inches long to provide balance for your longer pieces. Its 1/8-inch depth limiter lets you make fast adjustments for repeatable cuts. A 4-inch dust port expels particles away from your face to keep the air clean for safety and comfort.

1/8-inch depth limiter for faster adjustments and repeat operations Limited width
4-inch dust port keeps sawdust away from you No quick-set knives as found on cheaper Powermatic jointers
5-year warranty for residential use, 2-year coverage for commercial shops Lacks helical head cutters


Grizzly Industrial G0813-6″ x 48″ Jointer


Increase the functionality of your shop with this 6″ Jointer with Economy Stand and Built-In Mobile Base. It may be the smallest in our line of cabinet-stand jointers, but this champ packs a punch with its 3-knife, 5000 RPM cutterhead and dovetailed-way tables.

Table adjustments are a breeze with convenient lever-action for the infeed side, and precision handwheel adjustment for the outfeed side. The center-mounted, heavy-duty fence has stops at 45°, 90°, and 135°, with an extra-large handle for complete control when setting the bevel angle.

Built-in mobile base It is difficult to adjust the infeed table height.
Beds slide on dovetailed ways
Shielded & lubricated bearings
Heavy-duty center-mounted fence
4′ dust port

Shop Fox W1829


If you are on a tight budget but in need of the best jointer for the money, Shop Fox W1829 jointer is your ideal option. It features in our benchtop jointer reviews list because of its amazing features. These includes a dependable built table and dust port. One of the benefits of owning this powerful machine is its ease of use.

This benchtop jointer operates using a 1.5HP single-phase 12-amp motor that has enough power for all woodworking needs. The motor powers a cutter head featuring two knives that rotate at a speed of 10,000 RPM.

It has a powerful and effective motor. The tables do not line up as expected.
The knives are easy to remove. Chips the wood sometimes because the fence fails to tighten well.
An affordable price for great features.
Highly durable and sturdy build of cast iron.
Offers clean cuts and great performance.

Craftsman CMEW020


10 Amp Benchtop Jointer features a variable speed range of 6,000 to 11,000 RPM and cutter head speed of 12,000 to 22,000 cuts per minute, allowing selection correct speed for material’s size and hardness. Two-knife cutter head, with jackscrew knife leveling arrangement and built-in cutter head lock, allows for easy knife replacement and adjustment. Jointer is ideal for edging, flattening, or face jointing.

Cast-iron tables & fence The cutting depth is too low
Integrated dust collection
Precision adjustments on the cutter head


We have come to the end of this review, these jointers review above are reliable, and promises to deliver optimally. Try it out in you workshop, you will be pleased you did.

Written by

Discover your pathway to success with our comprehensive resources on international scholarships, visas, travel, and a wide range of professional tools and equipment. Empowering you to build your future, one tool at a time. Visit our website for more information.

Leave a Reply

Your email address will not be published. Required fields are marked *