Best Coping Saws 2021

Are you interested in acquiring the best coping saws for your workshop? if yes, you are at the right place, in this guide, we would be x-raying the best coping saws out there, take a glass of water, seat, and read through this guide.

If you’ve ever wondered how intricate shapes on moldings are cut, it was probably the handiwork of a coping saw. While you use the coping saw, it is necessary you get a dust mask to prevent dust from entering your nose.

Coping Saw

A coping saw is a handsaw with a slim blade attached to a ‘U’ shaped bracket. It is a common woodworking tool, used extensively to cut curves, remove waste from dovetails and joining and cope moldings.

​Coping saws come with pins on the blade ends, and so they will come with wider blades to accommodate the pins.

These saw also tend to cut faster than the fret saw because they have some deeper gullets and they will take fewer strokes to remove the waste. Also, the blades on this saw are very robust and do not easily come loose, bend, or break.

Most coping saws are light enough to be placed in a magnetic tool holder, which should be an added advantage since your coping saws don’t have to be placed unorganized, unlike leaf shredders that are a bit bulkier.

​However, the coping saws will require two passes to get rid of the waste, unlike the fret that only needs one. Because the blade in the coping saw is thick, it will not drop in the kerf that your dovetail saw leaves.

Fretsaws are being increasingly used to cut such unusual shapes. But then, everybody doesn’t have access to such machines. Where fretsaws are not available, coping saws still rule.

Using a coping saw is not an easy job even though it is not a precision tool (which explains why they cost so less).

They don’t operate like other types of saw. To an untrained hand, it may be difficult to work with one. So it is important to buy the right coping saw. That is why we’ve created this guide to help you make the right decision.

Like a coping saw, a draw knife has a blade, but they perform different functions on wood.

COPING SAW BUYER’S GUIDE

The buyer’s guide for a coping saw is different from that of a tire inflator, since these tools operate differently, and have entirely different purposes.

Frame

When buying a coping saw, the frame is probably the most important part. One of the best ways you can figure out how long a coping saw will last is to consider the frame’s construction.

Coping saws are under a lot of stress and also need to remain flexible throughout their life to work properly, which means that corrosion that weakens the material or makes it stiff can be a huge deal.

Nickel-plated steel is probably the best material that manufacturers use for coping saws. It combines nickel’s natural corrosion-resistant properties with the strength of steel. Stainless steel is another good option, though it’s not going to do as well as those made from nickel-plated steel.

Bare steel stools exist out there, but you should be cautious when buying them. If they’re going to corrode easily, as steel does, then the tool may not have a very long lifetime, especially if you live in a humid climate.

Frame depth

Frame depth is also another thing you should consider. Coping saws usually come with a frame depth somewhere in the 4” to 6” range. The deeper the frame, the deeper into a piece you can cut. While there is some correlation between price and depth, it’s not as solid as you would think. You should always double-check that you’re getting the frame depth you want before you make a purchase.

Blade installation

How easy is it to place the blade into the frame? Most blades have a pin on either end connected to a socket. The pin prevents the blade from slipping when you use the coping saw to cut wood.

Blade rotation

How easy, fast (and precisely) does the blade rotate? A coping saw can’t qualify as the best coping saw if it doesn’t have detents. Detents are important because they keep the saw in place.

Blade quality

A coping saw is only as good as its blade. Some coping saws have bi-metal blades. Others have carbon steel blades. In a bi-metal blade, a harder metal (carbon steel) is bonded to the teeth of the blade to ensure a sharper cut.

The blade base is a softer metal like steel so it remains flexible. Carbon steel blades are sharp but at the same time, they are brittle which means they are easier to break.

Tension in the blade

Blade tension refers to deflection in the blade. Most coping saws deflect less than 0.2 inches. If the deflection is more than 0.28 inch, it means the blade is not very taut and you’ll have trouble cutting with it. The tension in the blade is also determined by the frame. However, the tension in an air hammer performs a different function from that of a coping saw

Special features

Does the coping saw have any special features?  The quick-release lever to loosen the blade immediately or a knob to adjust the blade’s tension.

BEST COPING SAWS

NAMES FEATURES WHERE TO BUY
Robert Larson Coping Saw

B000CCXHM4

High-quality wood handle

Easy tension adjustment

Accepts standard blades

GET IT ON AMAZON
Stanley 6¾-Inch Coping Saws

B00009OYG2

Weight: 136 g

Dimensions: 33.5 x 19.7 x 2.5 cm

No. of Blades: 1

GET IT ON AMAZON
Eclipse Steel Frame Coping-Saw 70-CP1R

B002NH0EC2

Weight: 236 g

Dimensions: 33.4 x 15 x 2.4 cm

No. of Blades: 1

GET IT ON AMAZON
Smithline SL-400 Coping Saws

B0796YKKFF

5″ cutting depth

360-degree blade rotation

Rubber handle for a better and safer grip

Four extra blades included in the package

No slipping while cutting

GET IT ON AMAZON
Knew Concepts Coping-Saw

B07CMHR54J

Made in the USA

Machined from 3/16″ thick 6061-T6 aluminum

Weighs only 260 grams

Accepts standard 6.5″ pinned coping saw blades

6-1/2″ deep throat

GET IT ON AMAZON
Olson Saw SF63510 Coping Saws

B001NI8N2K

Wooden handle

360-degree blade rotation

Durable

GET IT ON AMAZON
BAHCO 301 6 1/2 inches Coping Saw

B0001IX6ZC

Weight: 277 g

Dimensions: 28 x 28 x 18 cm

No. of Blades: 1

GET IT ON AMAZON
Sheffield 58203 Coping Saw

B002BYDNLQ

Heavy-duty steel frame

360-degree adjustable blade

Comfortable and secure rubber grip

Fully polished plating

GET IT ON AMAZON
Irwin 2014400 Pro-Touch Coping Saw

B00QMJ8J4C

High tooth count, 17 TPI

High-speed steel blade

Ergonomic handle

Full lifetime warranty

GET IT ON AMAZON
Great Neck CP9 Coping Saw

B00004Z2NK

360-degree adjustable blade

Includes three blades

GET IT ON AMAZON

Robert Larson Coping Saw

B000CCXHM4

The Robert Larson 540-2000 coping saw is made in Germany. The company claims the 6-3/4 inches blade is adjustable to any angle. But we found you can’t rotate the blade easily which negates the company’s claim to some extent. The blade tension on this model is 0.164 inch which is much lower than average. It works well on dovetails and coping while delivering an average performance on curves.

A unique feature is, you can adjust the tension in the blade by rotating the handle. Like most coping saw tools we’ve seen, the handle on this model is also made of wood. The frame is light but stiff. So no surprises there. Note that many customers have complained the handle is a little misaligned which might affect the cutting. If you have large hands then this model is not suitable for you.

PROS CONS
Adjustable blade The blade could get weak easily
The frame is a solid one The handle is not nonslip and may not work well with large hands
The frameworks with standard coping saw blades

Stanley 6¾-Inch Coping Saws

B00009OYG2

Making furniture with aesthetic designs often requires cutting intricate patterns through the wood. You need a top-notch coping saw to achieve this and this one from Stanley Hand Tool lives up to this attribute.

Grip handle for comfort. The handle is made from a meticulous combo of plastic and rubber. What you get from this in contrast to wood is nice to grip that would effort you with comfort.

With 6-4/3 inches frame depth, the control you get from the tool is maximum. Well, the tempered steel with which the blade is made also provides clean, controlled trimming of whatever type of wood you choose to work with.

PROS CONS
Has a rubber/plastic grip handle The overall design is uninspiring
Ergonomic Blades are brittle

Eclipse Steel Frame Coping-Saw 70-CP1R

B002NH0EC2

This coping saw from Eclipse is perfectly functional, but nothing special. Like most other coping saws, it has a strong steel frame and the blade can be positioned at any angle. However, the blade tensioners aren’t very well thought out and they are quite difficult to adjust.

We never seemed to be able to get quite enough blade tension. It’s higher priced than many other saws that offer the same features, so you could save yourself some money and get a better saw for a little less.

PROS CONS
Blades can be positioned at any angle Knobs for blade tension are difficult to adjust
affordable
Durable spring blade

Smithline SL-400 Coping Saws

B0796YKKFF

If you are looking for a heavy-duty coping, saw to cut out intricate shapes. Then look no further than the Smithline SL-400 coping saw. The saw comes with a very comfortable rubber and plastic grip so that you can maneuver it efficiently and without any fatigue.

The SL-400 coping saw comes with a die-cast zinc alloy blade holders for exceptional stability. The frame itself is robust and has a construction of quality steel. Furthermore, it is quite stable and holds the blade tension when tightened. It has a very desirable quality when looking to work with delicate or hard materials.

When measuring the coping saw, the length of the blade is 6.5 inches, and the depth of the frame or throat depth is 4 3/4 inches. Moreover, the saw comes with four additional modules: two medium blades for all types of woods, one fine blade for hardwood and two extra-fine blades for softwood. These extra blades make the saw versatile and adaptable to any situation.

PROS CONS
Has fair enough depth of cut Handle sometimes deflects
Comes with four extra blades
Good design
Can work on all texture of wood

Knew Concepts Coping-Saw

B07CMHR54J

The design of the saw is wonderful and getting the job done satisfactorily trumps aesthetics at any time. To a large extent, the Knew Concepts 6-1/2 inches Woodworkers Aluminum Coping Saw meets this expectation.

As one would expect, the saw combines a frame to which a tensioned blade is attached. Unlike a typical saw with a metal frame, this one is held together by an aluminum frame with a nice design. The frame also has come in a bright red color that makes it easy to locate in your toolbox.

The sharpness of the blade is a wonder. Coupled with the control provided by frame, be rest assured that the blade will move through wood with unimaginable precision.

PROS CONS
Adjustable blade Price is on the high side
The blade can rotate 360 degree
Deep throat is about 6.5-inch
The frame is attractive and functional

Olson Saw SF63510 Coping Saws

B001NI8N2K

The Olson SF63510 takes the adjustable blade to another level, giving you a full 360-degree turning radius. It’s also even lighter than the Robert Larson model, however more likely to bend under extreme treatment.

The 6.5″ blade has 15 teeth per inch and a 4.75″ cutting depth. This model will also allow you to tighten the blade from either end, making it easier to tension the blade correctly and reducing “drift” in straight cuts.

PROS CONS
The blade can rotate 360 degrees Alignment of the blade can be tricky
Has fair enough cutting depth The handle is not nonslip
Comes with wooden handle with a firm grip
The frame can take different kinds of blades

BAHCO 301 6 1/2 inches Coping Saw

B0001IX6ZC

The Bahco 301 6 1/2 inch coping saw is a large coping saw that has blades constructed of tempered and hardened carbon steel. Another feature is the frame is constructed of nickel-plated steel.

The handle is a beautiful orange lacquer on top of a beech wooden handle. Due to its 14 teeth per inch and its 6 1/2 inch long blade, it has a powerful cutting surface.

The teeth are also milled and set. The blades are interchangeable and fit in place with retaining pins.

PROS CONS
Sturdy construction You may see bowing in the blade
Comes with a blade The blade is not always aligned properly

Sheffield 58203 Coping Saw

B002BYDNLQ

Sheffield 58203 is built to ensure that besides getting some precise and accurate cuts, it will be many years before you need to buy another coping saw as it is highly durable.

Its durability stems from the heavy-duty steel frame that makes it strong and durable for long service life and the fact that it has a 2-piece design for added strength. Also, the fully polished plating adds to the durability by preventing rusting.

With this top-rated coping saw you also get a 360-degree adjustable blade that will allow it to make a wide variety of cuts and attaching the blade is also simple thanks to the chamfered drive end.

Users will also love the soft and ergonomic grip as it ensures you always get a secure and comfortable grip so that you can use the saw for extended periods with minimum fatigue.

PROS CONS
Rust-resistant plating The handle is still not very good for sweaty hands
Ergonomic and secure rubber grip At times the handle can loosen
Strong and durable steel frame
Several extra blades included
The blade is 360-degree adjustable

Irwin 2014400 Pro-Touch Coping Saw

B00QMJ8J4C

Irwin Tools is famous for making some of the best coping saw blades, and so it should be obvious that they also have some of the best coping saws in the market like their model 2014400.

It is one of the cheapest models on our list and its 17 TPI tooth count is also the highest on our list which makes it one of the best options for making delicate cuts This top-notch coping saw uses high-speed steel blades that will cut through various materials easily and with DuraSteel pins designed to hold it in place securely.

And with its ergonomic handle, this will be a more comfortable and secure saw to handle, and to give you some assurance that it will last, the manufacturer provides a full lifetime warranty.

PROS CONS
Relatively more affordable The included blade can be a little too coarse for some cuts/materials
Ergonomic and comfortable handle Not very ideal for larger jobs
Full lifetime warranty
Highly secure blade pins
Precise and durable blade

 

Great Neck CP9 Coping Saw

B00004Z2NK

It is easy to categorize Great Neck CP9 Coping Saw as one of the regular ones around. The frame looks simple. Blade, fastened to the frame, looks even simpler. But make no mistake because you are about to get real value for money if you end up going for it.

The frame, which is made from solid steel is nickel-plated all over. What this assures is that no matter the exposure to sun rays or water, it will not be affected by corrosion. It is also a frame that you can expect to stand the test of time.

Every carpenter appreciates if a coping saw is flexible and the blade is adjustable at least to 180 degrees. Well, this one assures of 360 degrees, a level that most manufacturers of this type of tool aims.

PROS CONS
The frame is Nickle-plated against corrosion Replacing the blade is not easy
Blade rotation can go full circle The handle is made of plastic
It is versatile
It comes with three blades

CONCLUSION

If you make a lot of intricate cuts or make different shapes and patterns on thin wood materials, a coping saw is a must-have as it will make the cuts easier and more precise for you.

But not just any coping saw will work for you. You need to choose the best model by considering important factors like the frame, blade material, and ease of handling.

However, with this piece to guide you, finding the best coping saw should be a simple task because besides explaining what to look for, we also review 7 top-rated models to give you some high-quality recommendations.