Best Crosscut Sled 2021

Woodworkers are faced daily with the challenge to impress their customers. However, with the right tools like crosscut sled, you will be able to deliver optimally. In this guide we would be reviewing the best cross-cut sled, if you need to get one, you should read through this guide for better knowledge.

What is a crosscut sled?

A cross-cut sled is a guide unit with an inbuilt calibrated protractor used to hold workpieces while cutting them to a specified angle on a table saw. The cross-cut sled unit is attached to the table saw via the miter slot.

Why is a crosscut sled important?

If you want accurate cuts then there is no other option than to invest in a cross-cut sled. Without one, you run the risk of cutting your workpieces at the wrong angle, even if just marginally, for pieces to fit together perfectly and projects too.

As you dealing with woods, you might want to use drawer slides to make drawer cabinets for your home or clients. Some other tools you could use as you work in your wood workshop is are chainsaws and hole saw, to cut desired shapes from wood.

You might also want to refurbish the paint on your ceiling, you should get durable ceiling paints, for better finishing.

BUYER’S GUIDE FOR THE BEST CROSSCUT SLED

The factors to be considered when getting crosscut sleds are different from the factors considered when getting Geiger counters.

Plate

Currently, there are two different kinds of table saw blades available at the market. The first one has a bigger plate and the other one has a smaller plate.

Those are self-explanatory that bigger planets are better at working and cutting bigger pieces.  While the smaller plates are specifically perfect to cut small pieces. So, now it’s your turn to determine which type of task you will perform with the sled.

If you have smaller parts to cut or bigger, choose the sled according to those factors.

Cutting

If your project requires a cross-cutting table saw blades, then you should get one. On the other side, you may need slats that support angle cutting. Especially the sled s that have incremental angle change will help you if you are looking for precision cutting.

Support

This is another important factor as the support will help you to get a clean cut. Without enough support, you may lose control of your cutting pieces.

This will result in wobbly cuts that are not accurate. That’s why you must review the support of the sled before buying one. If you feel that a sled has enough support for your cutting work then you should get the sled kit.

Compatibility

It’s another factor that most people left behind. You must check your saw machine if it is compatible with the sled that you are going to buy. Not all blades support every table saw. If you buy one sled without reviewing your table saw model and brand, this might cost you unusable saw sled.

Accuracy

Let’s be honest here, you can’t cut squarely or straight if you don’t have the right sled for your table saw. This brings us to the accuracy of your sled. Check out to see if it produces wood pieces accurately before buying it.

Versatility

A good crosscut sled brings about versatile angle stops; if you’re looking to enjoy your work, consider a sled that allows angle stops of 0 to 45 degrees with its increment control.

Crosscut thickness and clamping ability

Well, there’s something very vital to know about crosscutting, which is the thickness of your pieces and the safety the sled offers you. That said; check out if your sled has thickness increment the best being those which can go from 1/3 to 1 1/8 inches with clamps that hold wood onto place.

Ease of use

You don’t want to hurt yourself buying a sled that you’re not aware of how to use it. That said, get to the market and buy the ones that come with adjustable grips and angle stopping so that you can easily get to use them.

Quality material

This is about buying a sled that brings back the value of your money, it means buying a sled that is made of sturdy material to last longer for your wood projects.

Length and depth of cuts

Once you’ve decided to buy a sled, consider knowing your project’s cutting needs. If you’re to cut wider or longer crosscuts, go for those designed for bigger projects.

Capacity

There are two important capacity features you must check.

  • Mitre gauge bar

Make note of the crosscut sled dimensions and compare it to the miter slot on your table saw. The miter gauge must fit appropriately into this slot, if it doesn’t, the miter gauge will have some ‘play’ in it during use, leading to less accurate cuts.

Most crosscut sleds follow the standard dimensions of 3/4’’ by 3/8’’ which can fit most tables saw miter slots. Various miter gauge models also feature multiple expansion points to maximize stability during use.

  • Fence length

The fence on crosscut sled models that have them can be extended to varying lengths. Some may reach a maximum length of 40’’, whereas others may only reach 24’’. If you intend to work with longer workpieces, it is worth investing in a miter gauge with a longer fence.

BEST CROSSCUT SLED

NAMES FEATURES WHERE TO BUY
INCRA MITEREXPRESS Table Saw Sled

B000E327NG

Slides easily

Miter-cutting platform

Precise controlling

Miter gauge

GET IT ON AMAZON
Rockler Table Saw Small Parts Sled

B07FNX5C7W

Sled base and fence provide zero-clearance support—just run it through your saw to locate the kerf

Sled rides in miter track of your table saw—included miter slot stop limits forward travel of sled

The rear-mounted blade guard is adjustable to fit most table saws

GET IT ON AMAZON
Big Horn 14600 Crosscut sled

B01N5IBLIK

Standard 3/4″ x 3/8″ track | Degree angle range: 0°90°

Material: CNC machined aluminum & steel

Positive stops: 0°, 22.5°, 30°, 45°, 60°, 67.5°, 90° (common angle)

Surface finish: anodize

GET IT ON AMAZON
Rockler Table Saw CrossCut Sled

B0754K1HKW

Large Protector Scale

Precise Angle Fine Tune

Air-tight Meter

CrossCut

GET IT ON AMAZON
Rockwell RW9266 Table Saw Sled

B018S5QEWG

Ideal for precise cross-cutting applications

Cutting groove for easy alignment

Room to place your hands safe during your cuts

Helps produce 90-degree cross cuts

GET IT ON AMAZON
Incra MITER5000 Table Saw Sled

B0002ZO7A2

T-Track

Clamping Feature

Incremental Angle Control

Laser Cut Teeth

GET IT ON AMAZON
Incra MITERV27 Crosscut sled

B0007UQ2DW

Precise cutting

Accurately cut projects

Zero sided play sled

Mounting bracket support

Very versatile

GET IT ON AMAZON
POWERTEC 71005 Miter Gauge Sled

B00GBFKOH2

Cheap

FUNCTION: Provides you with a premium table saw miter gauge replacement that allows you to make crosscuts at any angle with high precision

FEATURES: Positive stops at all common angles for exceptional accuracy, a large ergonomic grip for control and comfort, set screws to remove any play, and a tip-resistant washer to keep the unit

GET IT ON AMAZON
The Original Dubby Cut sled

B00CPTFI7E

Working with large panels

working with angles

working with small pieces

one side is better than nothing

GET IT ON AMAZON
Kreg KMS7102 Table Saw Miter Gauge

B0002QZ4R6

Factory calibration out of the box to within 0.003 of 6 inches

Vernier scale allows 1/10th degree adjustments

The micro adjuster allows additional adjustment to 1/100th degree

Fence bar can reach a max length of 24’’

Aluminum miter bar features 5 adjusters for zero play in the miter slot

GET IT ON AMAZON

INCRA MITEREXPRESS Table Saw Sled

B000E327NG

This sled can provide you with a smooth transition that will end up with a nice cut.

You won’t find any wobbliness and vibrations in the cutting.  It has a meter cutting platform that has enough support for clear-cutting. The overall structure of the body is robust and it can work for a long time. In this kit, you will get more support and more precision at your work.

Your woodworking or any other cutting work will be smooth and accurate. There is no chance of being out of measurement. You can easily place cutting pieces on the sled as there is naught space available.

PROS CONS
Small size sled Poor adjustment settings
Easy to use
Slides easily
Built-in Scale
Proper object support

Rockler Table Saw Small Parts Sled

B07FNX5C7W

This miniature crosscut sled lets you use your table saw to cut small parts to length. Great for cutting dowels, tenon stock, and small moldings at a precise 90° angle, with little to no tear-out. The sled features zero-clearance support, which reduces the chance of small pieces getting stuck between the blade and throat plate, or falling through entirely. A small plastic ramp on one side of the kerf carries the drop-off piece away from the blade. The sled includes a miter track stop that limits the forward travel of the sled.

PROS CONS
Works with smaller parts Some find issues with durability
Has miter slot stop
Fits easy on saw machine
Blade Guard
Aluminum T-track

Big Horn 14600 Crosscut sled

B01N5IBLIK

Speaking of Bighorn, this crosscut sled is not just a mention, but a master at work. It comes with a standard miter gauge track that measures ¾ by 3/8 inches, which means precision is part of its good features.

This miter’s precision brings about safety and accuracy when you’re crosscutting or mitering. It also has a slide bar with a locking washer which fits appropriately into its matching groove. On the other hand, it is designed with a knob that ensures your cutting from any table saw fits in any standard.

PROS CONS
Excellent construction You’ve to measure the miter slot first.
Quality angle stops Not very accurate
Value of the money
Safer and faster
Easy to use

Rockler Table Saw CrossCut Sled

B0754K1HKW

In this Rockler crosscut sled, you will get much more than your expectations. It is precise, easy to control, and has all the standards for a perfect cut. Firstly, this sled has a unique mechanism and design for different cuts

You can perform a rounded cut and a string cut both in the same sled. The material of the sled is durable and provides you smooth cutting operation.

Here you can easily finetune your angles with much smaller increments. Getting accurate angles might be hard on other sleds, but on in this kit.  This is also a perfect table saw crosscut sled with air-tight meter cutting.

PROS CONS
Eliminate unwanted slop. Works only on large table saws
Gives accurate cutting
Easy-to-read scale
Perfect for angle cutting
Smooth-sliding materials

Rockwell RW9266 Table Saw Sled

B018S5QEWG

It’s a Rockwell’s BladeRunner X2 sled that has one of the best tables saw crosscut sleds you can use easily.

The body of the sled is black which makes it easy to work with. The darker shade helps you to concentrate on the particle or pieces you are working on. There is a built-in meter scale to help you guide the measurement. It will provide you with information about the cutting pieces.

If you look closely and place your object according to the reading, in the end, you will get accurate cutting

PROS CONS
Gliding objects are smooth Only compatible with Rockwell Tables
Darker body-color
Fast installation
Easy to work
Built-in miter

Incra MITER5000 Table Saw Sled

B0002ZO7A2

This Incra’s sled is a perfect kit that will provide you with accurate cutting. We are talking about the Incra MITER5000, one of the most successful tables saw sleds.

Here you will also find a miter gauge that works great. Unlike other gauges in the market, you will find a real solution to your cutting problems.

It is also one of the best cross-cut sleds that will provide you precise angle at your cutting. The angle it gives you is a great one to review. This sled has an incremental feature to set an angle. So, you can quickly increase or decrease the current angle in your cutting project.

PROS CONS
No friction at all Some find trouble with Cross-cut Angle
Allows you Cross Cut
Successful at precision cut
Lets you clamp object to sled
Incremental Angle Control

Incra MITERV27 Crosscut sled

B0007UQ2DW

The Incra MiterV27 is the cheapest option on our list, despite having some excellent features and offering great quality. It is far more compact than other models, so can be conveniently stowed away when not in use.

It also has 27 incremental stops allowing for a reasonable degree of precision, and the gauge has four expanding ports that make fitting it easy and ensure that there is no play once the gauge is fitted to your table.

PROS CONS
Compact and easy to store No fence
Very easy to use Not as precise as high-end models
Cheap

POWERTEC 71005 Miter Gauge Sled

B00GBFKOH2

It is designed for both hobbyists and beginner woodworking enthusiasts. Let’s get to know the in and out of this sled: Okay, this sled is generously made first of all; secondly, it brings about comfort and strength in your woodworking projects.

PROS CONS
A highly comfortable crosscut sled Not suitable for angles of between 22 and above degrees
Super sled for professional use Comes oversized at times.
Easy cross-cut fitting
Quality angle stops
Steady Gauge.

The Original Dubby Cut sled

B00CPTFI7E

If you’re a woodworker dealing with big projects, no crosscut sled’s good for you than this. When it comes to the best table saw crosscut sled, this one takes the lead, especially for big projects

PROS CONS
Highly accurate and quickly woodworking Not suitable for small parts
Good for making small pieces Hard for beginners.
Cuts large panels
Add creativity
Easy to use

Kreg KMS7102 Table Saw Miter Gauge

B0002QZ4R6

The Kreg KMS7102 table saw precision miter gauge takes our best value pick for its premium features for a less than premium price. It features a vernier scale that allows 1/10th degree adjustments and a micro adjuster that allows additional adjustments down to 1/100th of a degree. It also includes special stops at the 0, 10, 22,5, 30, and 45-degree mark. The fence bar can reach a max length of 24’’. The anodized aluminum miter bar is 3/8’’ thick by 3/4’’ wide and features 5 bar adjusters which ensure a snug fit along the miter slot to eliminate any movement.

PROS CONS
Made from durable components Handling pieces above 30’’ in length is tricky
Incredible value for money Slightly bulkier design
High-resolution protractor

CONCLUSION

Now, you have a well-laid buyer’s guide to help you buy a cross-cut sled. Always settle for the best miter gauge on the market. This will improve the outcome of your project.

This review has looked at some incredible miter gauge models worth investing in. They feature high-quality materials, meaning they’re highly durable. Also, they yield high-precision miter and crosscuts.

Also, if you have a furnace in your home, you might want to consider getting a furnace filter, to filter the air that gets it.