Best Engine Stands 2021

Automobile mechanics can not do without engine stands in their garage. So it is important to go for the best engine stands as this tool is a must-have. In this guide, we would be reviewing the best engine stands. Read through this guide to have a better insight. You might also want to get tools like crosscut sled and hole saws, these tools come in handy when required.

WHAT IS AN ENGINE STAND?

Repairing an engine is easier if you can see all parts of it. Since engines weigh a lot, that can be hard to accomplish manually. This is where a nice and handy engine stand comes in. The best engine stand is capable of holding a variety of engine sizes and weights. It should also resist damage and corrosion.

Engine stands can properly hold the engine and allow you to access the engine block in different positions.

The engine stand holds the engine block in position as you work on it. Without this equipment, the motor would hover all over the place, which is neither convenient nor safe.

ENGINE STAND BUYER’S GUIDE

The factors considered when purchasing engine stands are different from the factors considered when purchasing furnace filters, as these tools perform entirely different functions.

Legs and Balance:

Engine stands come with different numbers of wheels.

  • Three wheels

Three-wheel stands are triangle-shaped with two wheels in the back and one in front where the narrowed frame comes together.

These are meant to be used on motors that weigh less than 1000 pounds. Once you hit the ½-ton mark, the three-wheel stand becomes unstable and more likely to tip over.

  • Four wheels

Four-wheel stands are the most common and are sufficient for most engine jobs. They have an L-shaped base with a wheel at each corner. This setup makes a stand very stable and less likely to tip.

  • Six wheels

Six-wheel stands are also very sturdy and suitable for almost any job. They do take up more space than the four-wheeled ones, though.

They are shaped like a triangle with the tip chopped off. The back of the frame is the narrowest part, and the legs widen as they go forward. There are two wheels in the back, two at a cross-bar in the middle, and two in the front.

Frame

The frame determines the durability of an engine stand. From above you can see that all the products have a heavy-duty frame which is extra durable.

Most people make one mistake, using the stands beyond the weight limit. Do not say that I did not tell you. Once you choose to exceed the maximum capacity, you will only have yourself to blame. When purchasing tools like chainsaw chains and multimeters, you don’t need to bother about the frame.

Design

The design makes for many things. It makes for stability, and ease of use. Some engine stands require for fully manual rotation of the engine which can be tedious. Some engine stand designs make the rotating work easier by using a gear mechanism.

For stability, the wheel design determines how stable the stand will be. A four-wheel design makes for the most stable stands that do not require extra caution to move. Also, casters that lock make for a safety measure.

Weight Capacity

The weight of your engine determines the size and type of stand you will need. As stated above, a three-wheel stand is sufficient for engines that weigh less than 1000 pounds, or 1/2 ton. Any heavier and you risk the chance of it tipping over.

For motors weighing 1000 pounds or more, use either a four-wheel or six-wheel base.

Folding Stands

Engine stands that fold up is great, especially if you don’t have a ton of space to store one when it’s not in use. Some are more compact than others, so read the total measurement of the compacted state to ensure that you have enough room before you buy one. The folding function is also seen in some measuring wheels, to aid easier movement.

Rotating and Locking Heads

Your engine stand must have a rotating head, so you can turn the motor to a position where it’s easily accessible and comfortable for you to work on. It’s essential that once you find that sweet spot, you can lock the head in place so it won’t move around on you while you’re trying to work.

Caster Size and Locking

Stands with large casters are easier to move around. They don’t get caught up as easily on cracked or uneven floors.

Most engine stands have swiveling casters in the front and fixed ones in the rear. Be sure that at least one wheel will lock. This will help keep the stand from moving while you are working.

Access for Cherry Pickers

A cherry picker is the hydraulic crane-like tool that you use to pull your motor out of your car. It’s used to lift the engine over the nose of the vehicle and then lower it to the height of your engine stand. Once they’re at the same level, you can transfer the motor to the stand to work on.

Cherry pickers are not meant to hold your engine for an extended period, so be sure the engine stand you choose has enough space to allow easy access for your cherry picker. Pulling the motor won’t do you any good if you can’t get it attached to the stable working base.

BEST ENGINE STANDS

NAMES FEATURES WHERE TO BUY
Sunex Tools Sunex 8300GB Engine Stand

B00I5LARHM

Ball bearings on the caster give for smooth movement

Safety lock feature on the casters

Foldable engine stand for easy storage

The engine automatically locks to the position you want

GET IT ON AMAZON
Torin Big Red Engine Stand

B004R900GO

Rotating engine stand is constructed with heavy-duty steel, providing long term durability with an industrial lustre; An extra-wide base provides maximum stability

Mounting head features (4) adjustable arms and 360-degree rotation, allowing for easy access to any part of the engine; Securely holds most foreign and domestic engine blocks

Engine stand features a 3/4 ton (1,500 lb) load capacity and is equipped with (2) fixed casters and (3) 360-degree swivel casters for smooth maneuverability

GET IT ON AMAZON
Performance Tool Engine Stand

B001DKSQX4

Rugged construction with heavy-gauge metals

6-lock positions

A maximum load strength of 1,000 pounds

GET IT ON AMAZON
Torin T23401 Engine Stand

B000CO869Q

Adjustable arms are customized for perfect alignment with most engines.

Your stand is protected from rust with the powder-coated finish.

The base is extra wide so that you don’t have to deal with unwanted shaking.

GET IT ON AMAZON
Sunex 8400 Folding Engine Stand

B014US9NNW

Thick, reinforced mounting plate ensures the engine is held securely

8 locking angles mount the engine in the desired position

Folding design conveniently stores away in a crowded shop or garage

1 Year Warranty

GET IT ON AMAZON
Jackco Rotating Engine Stand

B078HNR8LF

Easy Rotation. Effortlessly rotate the engine while it-self locks in any position.

Durable Frame. Constructed of high-grade steel square tube.

Adjustable Arms. Accommodates most engines.

Tool Tray. Keeps tools and parts easily accessible while working on an engine.

GET IT ON AMAZON
K&L Supply MC25 Metric Engine Stand

B000GV3DSE

This versatile engine stand is easily adjustable to accommodate the wide range of engine types in service today, from twins to in-line fours and six-cylinder

Height and width are both adjustable on the MC25, another major feature is the ability to rotate an engine a full 360 degrees

Pan removal, transmissions, and starter clutches are just a few of the services that will be made easier with MC25

GET IT ON AMAZON
OEMTOOLS 1 Ton Foldable Engine Stand

B01GGBK3S0

adjustable positioning

conserves space

protected by

durable materials

GET IT ON AMAZON
MOTOOS 1000lb Engine Cradle Stand with Wheels

B074V6FJC3

You can use this stand for storing, repairing, or even transporting engines.

The 4 casters will let you move it swiftly.

At under 9 kgs, this engine stand is probably one of the lightest ones of its kind.

GET IT ON AMAZON
OEMTOOLS 24846 Rotating Engine Stand

B075QKBZXZ

Locking head plate with 360 engine rotation

Tubular Steel Construction

Folding legs for easy storage

Heavy-duty worm gear for effortless rotation

GET IT ON AMAZON

Sunex Tools Sunex 8300GB Engine Stand

B00I5LARHM

Sunex 8300GB 1/2 Ton Foldable Engine Stand has the wow factor in it. I have to say the engineering is incredible. An engine stand is all about the mechanics, and I will have to admit Sunex has done such an incredible job. Apart from the foldable design which is pretty cool, there are a ton of other awesome features.

The cranking system allows for the easiest of operation. It has a 63:1 gear drive worm ratio. The cranking is even better as it has an auto-lock feature. The engine automatically locks to the position that you desire once you stop cranking.

The swivel caster features ball bearings that allow for easy and smooth movement of the engine stand and a safety lock feature that stops the engine stand from moving when you do not want it to.

PROS CONS
The worm drive gearbox can rotate 1/2-ton of engine blocks This model of engine stand is expensive.
There are ball-bearings in these swivel casters
A space-saving foldable design

Torin Big Red Engine Stand

B004R900GO

An engine stand that can accommodate up to 1500 pounds of load, this is one of the best out there today. It has an excellent design that stays upright and prevents tipping over even when holding a heavy load. Compared to the engine stands with similar features, the price is more attractive. It is a balance between quality and affordability.

It is easy to move around, thanks to the fluid-moving swivel casters that allow you to place the engine in the exact area you want it to go. The engine is ensconced in its four arms, all of which are completely adjustable. It is also capable of doing a 360-degree rotation, perfect for allowing seamless mounting and for better adjustability to access all sides of the engine.

PROS CONS
A 360-degree swiveling head with and lock mechanism It might be very risky to support engine blocks that weigh more than 1250 lbs with this engine stand
Four of the swivel caster wheels have ball-bearings
It’s easy to set up and uninstall

Performance Tool Engine Stand

B001DKSQX4

Be able to mount up to 1000 lbs. of the engine with this entry-level tool that has a more affordable price tag. While it is not the cheapest one in this list, the price might come as an advantage to people looking for something that won’t break the bank. It comes complete with all the features you can find in the previous products including a 360-degree rotating function and 6 locking positions. The mounting head is also completely adjustable. Made from heavy-duty tubular steel material, you can expect this engine stand to last or a long time.

PROS CONS
It is easy to maintain. Some said this required the occasionally oiling but other than that, it is pretty low-maintenance. Some said the welds leave a little something to be desired.
This has a good price, great for those on a tight budget.
The length of it also fits many standard engines.
Users did not have issues rotating this contraption.

Torin T23401 Engine Stand

B000CO869Q

Want long term durability and safety of you as well as your crew? Then this stands from Big Red is probably the best investment you can do for your workshop. This is forged out of thick and dense square steel tubing. As a result, it can stand up to massive weight without bending or shaking. The stand can even hold engines as heavy as 750 pounds. And since you can rotate the haft, you can take a close look at any component of the engine for better diagnostic and maintenance work.

PROS CONS
Rotates 360° Tips easily
750-pound capacity
Four adjustable arms

Sunex 8400 Folding Engine Stand

B014US9NNW

The Sunex 8400 is our favourite engine stand because it has a sturdy frame that won’t flex under the weight of any motor that weighs up to one ton. Its casters have ball bearings in them to make them easier to move around. They also have a safety lock to keep them from moving when you don’t want them to. The mounting plate that’s used to secure the motor is thick and reinforced to help ensure that your engine is secure while on the stand.

This stand has a rotating head that will lock in eight different positions to allow you the most straightforward access to the area of the motor that you’re working on. It also allows you to raise the engine high enough that you don’t have to work in a constant bent-over position. Once you’re done and have put your motor back into your vehicle, the Sunex 8400 folds up nicely to store in a small area of your garage.

PROS CONS
Thick, reinforced mounting plate Holes become misaligned when rotating the engine
Safety lock on casters
Eight locking positions
Non-flexible frame
One-ton capacity

Jackco Rotating Engine Stand

B078HNR8LF

Jackco has a rich history producing high-quality automotive repair equipment, mostly hydraulic tools and equipment. Their prowess in this area is well demonstrated by the features and capability of the Jackco 1000 lb. Capacity Rotating Engine Stand with Tool Tray. Rated at 1000 lb. (0.5 ton) this product can handle a wide range of engines save those in the range of the v6s and the v4s.

Stability is one feature you will notice on this eye-catching engine stand. Featuring a one-leg design, this engine is wide at the back and slightly narrower at the front. The leg is well supported and spread to carry the weight.

The stand rolls on four sturdy caster wheels, with the front ones being rotatable. The front swivel casters are also lockable to help to keep work steady. The steel bearings on the wheels are another reason this stand should serve you for many years without demanding replacements or repairs.

PROS CONS
These front-locking casters are maneuverable The bolt for each adjustable arm is too short.
Durable construction
A built-in tool tray

K&L Supply MC25 Metric Engine Stand

B000GV3DSE

This one of a kind versatile engineering stand should be a priority for anyone dealing with a wide range of engines, from twins to in-line fours and six cylinders. Every motorcycle owner or service person should have the product. We particularly loved it for the unique design and the silver finish.

The MC25 combines versatility with strength in a way that we have not seen in many stands. It weighs in at 25.7 pounds and measures at 26 x 16 x 2 inches, but both height and width are adjustable. For example, the height can adjust from 37 to 53 cm. This is an area where it beats most products in this price category.

PROS CONS
The height and width of this engine stand is adjustable Since the engine stand’s frames don’t have printed instructions to guide its installation process, it might be hard to figure it out initially.
It’s easy to work with this stand
A versatile engine stand

OEMTOOLS 1 Ton Foldable Engine Stand

B01GGBK3S0

Would you like to use engine stands that can maintain specific positions of engine blocks during repairs? The 1-Ton OEMTOOLS Engine Stand allows for easy mounting and movements. It’s heavy-duty steel frames enhances the stability of loads and your confidence during work.

While holding the block, this tabular frame spreads the weight and makes it difficult for the stand to tip onto the floor. This design enhances the safety of lifting and working on engines. Also, the adjustable mounting head makes a 360-degree rotation.

PROS CONS
It’s compatible with vehicle engines that are not above 1 ton The installation process is not quick and easy.
You store this stand with mechanical tools easily because it conserves space
It has a foldable design

MOTOOS 1000lb Engine Cradle Stand with Wheels

B074V6FJC3

Motoos presents to you an auto engine stand that is created from heavy-duty steel. Hence, it is perfectly made for rugged jobs in your workplace. Since it is from thick steel, you don’t need to worry about durability or longevity. So, you can use this product for years. Moreover, due to the rust-resistant coating on the surface, you don’t need to worry about corrosion.

Finally, it also has wheels that are extra-large at 3-inches. And don’t give way to damage even under a lot of pressure. If you are wondering how much of load it can take, then it can carry up to 1000 lbs.

PROS CONS
4 swivel metal casters for maximum manoeuvrability none
Solid Heavy Duty Steel Construction
Engine Cradle with Wheels for Chevy
Load Capacity: 1000 Lbs

OEMTOOLS 24846 Rotating Engine Stand

B075QKBZXZ

This OEMTOOLS Engine Stand can hold loads that are less than 1250 lbs securely. As a rotating engine stand, it’s ideal for several types of engine repairs.

When you need to replace spare parts in the manifolds of engine blocks, this 24846 model allows easy access to specific areas. While working on automobile engines, you can activate the head plate’s locking mechanism or rotate it in a 360-degree direction.

You can perform effortless rotations with its heavy-duty worm gear too. These unique designs are compatible with most automotive engine block configurations. Also, this tubular steel frame is a sturdy construction and it’s durable. It comes with foldable legs that allow you to store it easily.

PROS CONS
A head plate with a locking mechanism and a hand crank that performs a 360-degree rotation The height and length of this engine stand are not adjustable.
Space-saving design
Durable construction

 

CONCLUSION

You don’t need to look further because these are the engine stands that you won’t regret buying. But before ordering please go through the review again and pick the right one according to your need. So you pick the one that suits you best