Best Impact Driver 2021

Have you had it a little bit tasking trying to find the best impact drivers, then you are at the right place. This review is aimed at showing the best impact drivers out there. We have researched on impact drivers, and we came up with these few best drivers to carry you through your daily work. Read through, to discover the best impact drivers out there.

BUYER’S GUIDE

CORDLESS AND CORDED IMPACT DRIVERS

When people refer to impact drivers, what they are usually looking for is the cordless, battery-powered variety. A cordless impact driver allows you to be a lot more mobile, which is helpful when you will be moving all over the place. A corded impact driver is more likely to slow the process down and will.

Cordless Impact Drivers:

Cordless impact drivers can drive almost any type of fastener you throw at it and having a cordless tool that can handle that task is very convenient.

The cordless models are best suited for driving screws into harder materials but can make very light work of the softer materials too.

The cordless models do tend to get hot when you are driving a lot of larger fasteners in rapid succession and heat is the enemy of any tool.

You could just allow the tool to sit in between fasteners, switch between two different impact drivers or use a corded model if you have a situation that requires a lot of larger fasteners that need to be secured in a short amount of time.

Cordless impact drivers are rated in terms of volts (V) and the battery rating, measured in Ah is also an important metric.

Corded Impact Drivers:

Corded impact drivers do have their place in workshops and garages. For big assembly jobs and projects, consider getting a corded impact driver.

Impact drivers are incredibly handy tools that can drive and remove even the most stubborn of fasteners, making them a must-have around a boat, as well.

Corded models also have a much better gear reduction system than cordless models, so they stay a lot cooler and usually tend to last a lot longer than cordless models as well. They are much heavier (in most cases) though.

Corded impact drivers have motors rated in amps (A). Corded impact drivers are usually a lot more powerful than their cordless counterparts.

Brushless Motors:

If you have the budget for it, always consider impact drivers that utilize a brushless motor. Units with brushless motors are generally more expensive, but if you are using your impact driver all the time, the longer service life will pay off in the long run.

Brushless motors run more efficiently, extending the operating time of a cordless impact driver considerably.

Brushless motors also generate less heat, reducing the risk of burn-outs. Most forms of smart electronic features are also available exclusively to brushless models as well.

These supporting features let the battery and motor jive together to optimize performance and prevent thermal overload in impact drivers that have them.

TORQUE

This is the main metric to measure impact driver by since torque force is the main advantage they have over ordinary drills when it comes to driving fasteners and drilling holes. Torque is measured in inch-pounds, and impact drivers have plenty of it.

  • Impact drivers with 12V motors are easily capable of torque in the 750 to 1,200 inch-pound range.
  • Those with beefier 18V motors can put out 1,350 to more than 2,000 inch-pounds, enough to drive the thickest of fasteners into some of the hardest materials.

Some manufacturers prefer using feet pounds instead of inch pounds, especially for their bigger models. Corded models with motors rated at more than 9 amps are capable of more than 700 ft-lbs of torque, for example

IMPACTS PER MINUTE (IPM)

Since impact drivers are part of the power driving family of power tools, manufacturers will also cite Impacts per Minute (IPM) as a point of comparison. As the name suggests, IPM counts how many blows the internal hammer makes in 60 seconds. The higher the IPM, the faster an impact driver can pulse.

Most models will cite their IPM as “No Load IPM” figures – that is, the IPM they can put out while in the air. Both 12 V and 18 V models typically put out IPMs between the 1,750 to 3,750 IPM range.

A higher IPM generally means that you can drive stubborn fasteners in (or out) faster for the same torque.

ROTATIONS PER MINUTE (RPM)

Modern impact drivers try to save on power by not delivering the absolute maximum Rotations per Minute (RPMs) all at once. That’s why most tools have three or more RPM stages you can engage with ever deeper presses of the trigger.

Low RPM ranges generally go to 800 to 850 RPMs, while maximum No Load RPMs can go up to 3000 RPMs or faster.

As you might expect, the higher the RPM, the faster an impact driver can get the job done. It’s not as much as a factor for impact drivers compared to drills and planers, though.

In fact, too high of an RPM at the start tends to strip screw heads and ruin soft wood, which is exactly the problem you want to avoid as you select your impact driver.

BATTERY CAPACITY

For cordless models, battery capacity is measured in Amp hours (Ah). The higher the Ah, the bigger the capacity of the battery, the longer it will last between charges.

The popular power tool brands will usually include battery packs that are interchangeable with their other tools, as well, especially if your impact driver comes in a combo kit with, say, a regular drill and are usually a lot better deal than buying everything individually.

Some Basic Features To Be Aware Of When It Comes To Impact Drivers:

  • Built-in LED lights illuminate the target area, helping you see and aim even in dark and out of reach places. LED lighting is not only brighter, but it also saves a lot of battery power as well.
  • Adjustable Clutches or electronic clutch helps you fine-tune the force the impact driver exerts on the fastener. This feature is very helpful if you are using your impact driver in smaller woodwork like cabinet doors and windows.
  • Keyless chucks and fast-release features make changing chuck bits a seamless operation, increasing your productivity.
  • Vibration protection helps minimize the amount of vibration the tool gives off but the tool will still vibrate quite a bit, in most cases.
  • Special ergonomic designs and features help ease some of the shocks that the impact driver transmits to the hand. Simple things like rubberized pistol grips and a well-balanced design will go a long way towards helping you avoid repetitive stress, especially on jobs where you will be putting in hundreds of fasteners.
  • Easy to use toggle switches lets you switch the action from driving to reversing.

BEST IMPACT DRIVERS

  1. Milwaukee M12 Fuel Surge Impact Driver
  2. Dewalt 20V MAX XR Impact Driver
  3. Black+Decker 20V MAX Impact Driver
  4. BOSCH 12-Volt Max EC Impact Driver
  5. Ridgid 18-Volt IMPACT Driver
  6. Metabo HPT 18V Cordless Impact Driver
  7. Porter-Cable 20V Max Impact Driver
  8. Makita 18V LXT 4-Speed Impact Driver
  9. Ryobi 18-Volt ONE+ Impact Driver
  10. Milwaukee M18 Fuel Surge Hydraulic Impact Driver
NAMES FEATURES WHERE TO BUY
Milwaukee M12 Fuel Surge Impact Driver

B077ZYMK1W

5.2″ Long

450 in-lbs (of longer sustained torque)

3,200 RPM

3,400 IPM (impacts per minute)

4 modes, including a self-tapping screw mode

LED worklight

GET IT ON AMAZON
Dewalt 20V MAX XR Impact Driver

B0183RLW8A

Precision drive in speed 1 for precision applications and added control

3 LEDs with 20-second delay after trigger release, provide visibility without shadows

One-handed loading 1/4″ hex chuck with easy grip sleeve, accepts 1″ bit tips

Compact and lightweight design to fit into tight areas

GET IT ON AMAZON
Black+Decker 20V MAX Impact Driver

B00JJ3QY9A

Quick release 1/4″ hex chuck

Compact and lightweight for ease of use

Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

GET IT ON AMAZON
BOSCH 12-Volt Max EC Impact Driver

B01J4IDCMG

EC Brushless motor

Effective performance

Pro driving performance

Fast driving

GET IT ON AMAZON
Ridgid 18-Volt IMPACT Driver

B07SPF63CG

Best-in-Class Torque with an industry leading 2,250 in.-lbs

3-Speed Settings for added jobsite versatility

Tri-Beam LED for eliminating shadows on the work surface

One-Handed Bit Loader for quick and easy bit changes

GET IT ON AMAZON
Metabo HPT 18V Cordless Impact Driver

B07P6FHVP3

On-Tool Battery Indicator: To gauge the status of the battery

LED Light: Illuminates the work space when using the tool in darker areas

Lightweight:9 lbs (with 18V 1.5Ah battery)

Li-Ion Battery Technology: Fade free power and light weight

GET IT ON AMAZON
Porter-Cable 20V Max Impact Driver

B01KBWEBQU

Brushless motor provides 50% more runtime

Powerful motor provides 1,400 in-lbs of torque for large fastening applications

Transmission provides 2,700 MAX RPM’s for speed of fastening applications

1/4″ Quick change hex for one handed quick and easy bit changes

GET IT ON AMAZON
Makita 18V LXT 4-Speed Impact Driver

B07N9JBDK5

Built-in L.E.D. lights on both sides helps eliminate shadows and illuminate a larger area

Compact and ergonomic design at only 4-9/16″ long

Compatible with Makita 18V Lithium-Ion batteries with a Star symbol

3-year limited warranty

Only use genuine Makita batteries and chargers

GET IT ON AMAZON
Ryobi 18-Volt ONE+ Impact Driver

B077GNX1KW

RUBBER OVERMOLD

TRI-BEAM LED LIGHTING

Easy BIT CHANGING

MAGNETIC TRAY

ONE+ COMPATIBLE

GET IT ON AMAZON
Milwaukee M18 Fuel Surge Hydraulic Impact Driver

B01LXS42FP

Powerstate brushless motor

5” length, 2.38” width, and 7.67” height without a battery

LED work light

450 in-lbs max torque

0-3,000 RPM

4000 Impacts per minute

GET IT ON AMAZON

Milwaukee M12 Fuel Surge Impact Driver

B077ZYMK1W

The Milwaukee M12 Fuel Surge impact driver uses a hydraulic powertrain instead of a metal-to-metal impact mechanism. More traditionally, we call this oil impulse technology, and the tools deliver much less noise and vibration than traditional impact drivers using anvils. They also maintain their peak torque longer than standard impact drivers due to a longer strike duration. They tend to hit slower, but harder, to deliver a more even, and often faster, driving speed over traditional impacts.

PROS CONS
REDLITHIUM™ batteries deliver more work per charge and more work over the life of the battery Initially, tool balance felt different than others
REDLINK PLUS™ Intelligence prevents damage to the tool and battery due to overloading or overheating

Dewalt 20V MAX XR Impact Driver

B0183RLW8A

The DCF887B 20V MAX* XR® Brushless 1/4″ 3-Speed Impact Driver is compact for fitting in tight spaces and increasing productivity. Three LED lights make it ideal for working in dark spaces.

PROS CONS
Precision drive speed App navigation is more complex than necessary
Tool Connect feature for tracking and diagnostics
Exceptional runtime

Black+Decker 20V MAX Impact Driver

B00JJ3QY9A

Compact and lightweight, this battery-powered electric impact driver delivers up to 1375 inch-pounds of max torque. Features a powerful 20-volt motor and quick-release 1/4-inch hex chuck.

PROS CONS
It has a ¼ inch quick-release hex chuck for ease in changing bits. Somewhat ineffective magnetic bit holder.
It comes with a high-performance transmission of 1375 in-lbs max torque. A bit tight rocker switch.
It is compact and lightweight making it easy to maneuver.
It is powered by a Lithium-Ion battery with long runtimes.
It comes with a magnet in a groove at the top of the tool for bit storage.

BOSCH 12-Volt Max EC Impact Driver

B01J4IDCMG

The Bosch PS42-02 12 V Max EC Brushless Impact Driver Kit features a very compact but powerful 1/4 In. hex driver, two 12 V Max 2.0 Ah batteries and a charger. The PS42 driver has a 5.5 In. head-length and weighs just 1.6 Lbs., but it is a powerhouse, with an optimized impact system. It also has the Bosch performance control system, which supplies two speed settings, one for high speed and high torque and one for low speed and low torque. · Compact and light – just a 5.5 In. head-length and 1.6 Lbs. in weight

PROS CONS
Three LED lights – offers improved illumination in dark work spaces Might struggle on challenging jobs.
Performance control system – provides two speed settings
Rugged belt clip

Ridgid 18-Volt IMPACT Driver

B07SPF63CG

RIDGID introduces the Brushless 18V 3-Speed Impact Driver. This tool features a powerful 2,250 in.-lbs. of torque for the most demanding applications. RIDGID Brushless Motors offer more runtime and longer motor life. With registration, this tool is backed by the Industry’s Only Lifetime Service Agreement.

PROS CONS
Covered with Ridgid lifetime service warranty Expensive among others on the list
With tri-beam LED and hex-grip rubber overmold Does not include battery
Features 3 torque and speed settings

Metabo HPT 18V Cordless Impact Driver

B07P6FHVP3

Covered by Metabo HPT’s Lifetime Lithium Ion tool warranty, the WH18DBDL2 Triple Hammer Impact Driver is part of Metabo HPT’s 18V Brushless Lithium Ion cordless tool lineup and is in a class of its own. This revolutionary professional impact incorporates a third anvil for ultimate torque, less vibration, and faster tightening speed. Equipped with four different speed settings, the Triple Hammer impact driver can conveniently tackle a wide variety of applications with just one tool in hand.

It is powered by Metabo HPT’s Compact 3.0Ah battery that delivers the same capacity as a traditional 18V 3.0Ah Lithium Ion battery, but in a significantly smaller footprint with a lighter weight.

Additionally, it is IP56 compliant, meaning there is a degree of protection against dust and water exposure. Metabo HPT’s signature ergonomic tool body design makes it extremely well-balanced and comfortable for extended use.

PROS CONS
Uses the same 18-volt batteries as its other tools We missed some advanced features
Same quality/warranty as the company’s green tools.

Porter-Cable 20V Max Impact Driver

B01KBWEBQU

20V MAX* Cordless Impact Driver is brushless to increase motor life and deliver the power you need, along with 50% more runtime. This powerful motor handles large fastening applications, and provided enough RPM for quick speed. The quick-change hex allows for one-handed quick and easy bit changes.

PROS CONS
Compact, yet powerful and speedy Solid wireless run time Inserting and removing the bits is easy Practical LED light Light and handy Single speed only Not the strongest body Power delivery could be better The bundled-in charger isn’t that great

 

Makita 18V LXT 4-Speed Impact Driver

B07N9JBDK5

Makita has a legacy of innovation in the cordless impact driver category, and the 18V LXT® Brushless 4-speed impact driver (XDT16Z) sets new standards. The XDT16Z offers users four speeds, as well as Makita’s exclusive quick-shift mode™ for increased fastening control.

Quick-shift mode™ uses the Brushless Motor electronic controls to find the best balance of speed and torque for each application for more efficient fastening.

Another precision setting is tightening mode (T-mode), which down shifts and reduces rotation and impact speed prior to driving the screw into place, and is engineered to minimize screw thread stripping, screw breakage and damage to work.

PROS CONS
Comfortable to use Heavy weight of the battery
Built in LED lights
Highly reliable

Ryobi 18-Volt ONE+ Impact Driver

B077GNX1KW

The RYOBI® 18V ONE+™ Impact Driver delivers more innovation, features and power than ever before. The variable speed trigger assists in screw start up, allowing the unique impact mechanism to drive the longest deck screws or largest lag screws with ease by delivering more than 1,600 in lbs. of torque. It is over 33% faster and more powerful than the previous model and incorporates Tri-Beam LED lights to eliminate shadows on bits and fasteners in the darkest work areas.

PROS CONS
Triggers very quickly and stops quickly as well LED lights only engage when bit begins to spin
Removes lug nuts
Offers precise drive depth
High quality, powerful and durable impact driver
Loosens and tighten screws unlike other products
LED light for dark work areas

Milwaukee M18 Fuel Surge Hydraulic Impact Driver

B01LXS42FP

The M18 FUEL™ SURGE™ 1/4″ Hex Hydraulic Driver is the quietest cordless fastening solution on the market. With Milwaukee’s new FLUID-DRIVE™ Hydraulic Powertrain, users will experience up to 50% quieter operation, 3X less vibration for smoother operation, and faster driving speeds compared to standard impacts. The POWERSTATE™ Brushless Motor delivers up to 0-3,000 RPM with constant power output to drive screws faster.

PROS CONS
One-handed chuck. Single LED light.
Quiet impacts.

CONCLUSION

We have come to the end of this review. If you read through, up to this point, you might have seen an impact driver that caught your attention. If so, you shouldn’t hesitate in getting one for yourself, these tools are efficient. You will be pleased after you have gotten one for yourself