Best Mill Machines 2021

A professional is as good as the tools he uses, one tool that you can not afford to get wrong is the mill machine. These tools are important. If you are interested in getting the best mill machines, you should read through this guide, you will be pleased if you do.

There are some tasks that even the most potent drill cannot tackle. This means you can consider a milling machine should you come across such a work.

Commonly referred to as a mill, a milling machine is a powerful unit which, unlike a drill that cuts on the tip only, cuts on both the top and sides. It can also be used to make a hole, trim the end of a piece of material, or cut a slot in it.

Generally, a milling machine is super versatile, and, therefore, a must-have for DIY enthusiasts. It is also convenient, considering that it can be used both for heavy-duty tasks and delicate operations on the smallest of components. Well, with this piece of information, we know you may want to get a mill.

Like mill machines, garden kneelers are meant to give satisfaction to their users.

Why do you need a mill?

Some people might say that you can perform most, if not all, of the tasks a mill can do on a lathe. This is true but is warned, the tasks won’t be performed accurately. The design of the lathe just isn’t intended to deal with the forces encountered on a mill.

What about a milling attachment? These are very handy, especially if you have limited space, however once again, they’re not as accurate and can cost almost as much as a compact milling machine.

MILLING MACHINE BUYER’S GUIDE

The factors put into consideration when getting a mill machine is entirely different from that put into consideration for hose timers.

What kind of work do you have for it?

Basic, basic thing. Pair the tool with the tool user and the tool user’s needs. The Proxxon 37110 is a good example of a milling machine that works well for pretty small jobs. It’ll wear out being used for anything more substantial.

It was also the most affordable tool we reviewed, so you can save yourself a nice little bundle. On the other hand, if you get the wrong size milling machine to save yourself money you also limit yourself to the kind of work you can do.

Range of motion

The operating philosophy for any kind of drilling machine is that there is a specific place you want a hole and that the hole needs to be a specific diameter.

That applies here. You want a milling machine that lets you do that. You’ll want room between the table and headstock to accommodate larger pieces. One of the reasons why we ranked Shop Fox’s M1110 at the top is that it does this.

Motor power

You’re going to want to make sure that your model has good, reliable power. An underpowered motor is a motor operating on borrowed time. The motor power of a mill machine is stronger than that of a knife sharpener.

Workshop space

A defining factor in most machinery purchases. If you’re limited on space it can often lead to people buying smaller than they need, which leads perfectly in to… However, die grinders are smaller tools and do not consume much space as the mill machine.

Size of the work

Never get a machine where it’s maximum capacity just fits the size of the work you’re doing. Always go one higher or the machine will burn out a lot quicker. You should also put this factor into consideration when purchasing tools like air mattress pumps and plotter cutters.

The material you are using

Often not considered but if you are using hard materials, you will need a bigger machine to cope with the forces required.

Benchtop or floor-standing

This is often dictated by all of the above but generally speaking, hobbyists will only need a benchtop model.

Ease of use

Are you looking at being able to control the spindle speed or table movement with the flick of a switch or are you happy getting stuck in?

Budget 

Last but certainly not least is how much you are looking to spend. This will after all determine the size, quality, and age of the machine.

Horizontal or Vertical?

This is one of the main questions that need to be answered. So what are the main differences? Horizontal mills are very, very strong, and use horizontal blades to cut the material, allowing them to make bigger cuts with a higher load. These are recommended to production users or those who have very large jobs to do.

Vertical mills are extremely versatile with the ability to perform several different jobs across all axis. They can also be used as a precision drilling machine. This versatility lends them very well to the multitude of tasks a hobby user will want to do.

Universal mills are available on the market for anyone who thinks they need the capabilities of both a vertical and horizontal machine.

BEST MILLING MACHINES

NAMES FEATURES WHERE TO BUY
Mophorn Power Feed Al-310S X-Axis Torque

B074QPRTQL

Small volume and easy installation power feed

Noiseless direction changes

Safety feature to protect transmission gear and electronic components,

GET IT ON AMAZON
Proxxon 37110

B0017PTAHG

Stable cast iron base.

High-quality surface treated aluminum on the vertical column and compound table.

The headstock is die-cast aluminum.

All axes are play-free and have adjustable slides.

GET IT ON AMAZON
Erie Tools ETD-SM

B081S35TH7

Table travels along three axes

Built-in safety shutoff

Too much table slack

GET IT ON AMAZON
OTMT OT2213

B0076YFD4G

Way covers.

2-speed ranges.

Produces very little torque

GET IT ON AMAZON
Grizzly G0704

B006SJI8QA

Motor size: 1 HP

Table size: 26-5/8″ x 7-1/16″

Longitudinal travel: 18-7/8″

Cross travel: 6-7/8″

Spindle taper: R-8

GET IT ON AMAZON
Shop Fox M1111

B001R23SL8

The product contains some quick-tilt headstock

It also has the backlit digital tachometer

The product contains some data and detailed instructions

GET IT ON AMAZON
JET Benchtop Milling Machine 350018

B000051WSL

Precision depth gauge

Sturdy cast-iron column

Capable of three thousand rpm

GET IT ON AMAZON
Precision Matthews PM-25MV

B01AZMHN02

Sensitive to a thousandth of an inch

Smooth axial movement

3-year warranty

GET IT ON AMAZON
Jet 690036

B0007M6GK4

Head tilts left or right

Graduated scale on the column

Precision ground dovetail ways

One-shot lubrication system

GET IT ON AMAZON
WEN 33013 4.5A Variable Speed

B07FCQ859M

100 to 1,100 RPM for versatile use.

You can bevel the head and column 45 degrees in either direction.

R8 spindle taper and a pre-installed drill chuck are useful features

GET IT ON AMAZON

Mophorn Power Feed Al-310S X-Axis Torque

B074QPRTQL

It works so well that you will be surprised by its performance. Mophorn, its manufacturer, has equipped it with a jog function that operates at any speed. They have also gone the extra mile to include a safety feature, which protects the transmission gear and electronic components to meet the requirements of ergonomics. Lastly, this milling machine has a wide rotate speed, which ranges from 0 – 200RPM.

PROS CONS
The product contains some safety features only to protect transmission gear and also electronic components. none
The product contains some small volume as well as the easy installation as well.
The jog function of this product operates at any of the feet’ speed.

 

Proxxon 37110

B0017PTAHG

There is one unique feature of this milling machine. And that is its visually-appealing design. Well, unlike most milling machines, this particular unit is small and beautiful at the same time. Moreover, it delivers unrivaled accuracy, which makes it perfect for electronics, jewelry, optician, lab, and model building projects.

Apart from versatility, this milling machine boasts unmatched durability, which is solely brought by the cast iron construction. Another feature that shows that it is built to last is the high-quality aluminum vertical column and compound lathe.

PROS CONS
Z-axis has too much play none
5000 to 20000 rpm variable speed
A good complement to a larger model

Erie Tools ETD-SM

B081S35TH7

The Erie Tools ETD-SM-MILL is one of the best mills. While it doesn’t have as much power as the first two entries on our list, it is significantly cheaper. Boasting RPM of up to 2000, it does have the punch to get the job done, though it will likely take a bit longer.

This machine was also designed with both drilling and milling in mind, which means that you won’t face the same technical problems that other models have. It also includes important safety features like a clear spindle guard and a safety shut off switch. It does have one of the smaller tables on this list, however.

Overall, the Erie Tools mini mill provides great value, giving you the cutting power to get through most projects, but comes at a more reasonable price than more powerful mini-mills.

PROS CONS
Good Power Smaller table
Safety features
Designed for drilling and milling

OTMT OT2213

B0076YFD4G

It works great, so it’ll tackle bigger, meaner jobs than less expensive models. And, compared to other, bigger models, it’s more affordable. So, best for the money. There was some slippage along the X and Y axis, and we worked accounting for that. It would have been nice to concentrate purely on getting the milling right.

But, you do get what you pay for. This is an affordable benchtop mill that can handle stern stuff. Want perfection, be prepared to pay for it.

PROS CONS
Minute dial increments for accuracy Slippage in X and Y-axis
Near two-inch face milling capacity
Good for repairing firearms
Great value

Grizzly G0704

B006SJI8QA

The G0704 7″ x 27″ 1 HP Mill Drill with Stand can be easily operated by those just learning to mill and is also great as a dedicated, single-purpose machine in a professional shop. It is an excellent value and has some of the same features found on much larger mill drills. That’s why it is the best-selling Mill Drill in the country!

The variable speed 1 HP motor powers the R-8 spindle from 50-1125 RPM in low and 100-2250 RPM in high. Spindle RPM can be monitored on the convenient digital readout. A clear chip guard on the spindle keeps debris from flying at the operator.

PROS CONS
Includes a stand none
13-inch spindle-to-table distance
Forward and reverse gears

Shop Fox M1111

B001R23SL8

The Shop Fox M111 is an industrial-quality machine, which can stand up to the rigors of the heavy-duty on regular use. It has the robust one horsepower, 220-volt motor, as well as subtle adjustable speed controls, but its regulating jib lacks precision.

PROS CONS
Reverses near-instantly at top speed none
Backlit digital tachometer
Quick-tilt headstock

JET Benchtop Milling Machine 350018

B000051WSL

These combine a belt driven drill press with the dual coordinate abilities of the milling machine’s table for flexibility and efficiency. A locking collet prevents the cutting tool from falling away from the spindle when lateral forces are experienced against the bit. Although light in construction, the JMD Milling Drilling Machines possess the advantages of space-saving versatility, affordability, and light machining capability.

PROS CONS
UL Listed motor none
Drill Press angle vise
Extra-large worktable
The base taper allows for easier cleanup

Precision Matthews PM-25MV

B01AZMHN02

The Power Lift system for the Precision Matthews PM-25MV mill is used to raise and lower the mill head with the flip of a switch. Using the Power Lift system is easy.  Just press the switch up or down and release, and you are done.  It is much faster than using the handwheel and much easier on your shoulder.

PROS CONS
Extra Large Column To Base Mount, Over 400% More Area, Makes A Much More Rigid Machine, Greatly Improved Over Other Machines In This Size Range none
Extremely Reliable, Brushless DC Variable Speed Motor Included Standard
Belt Drive Design, For Smoother, Quieter Running

Jet 690036

B0007M6GK4

Along with some convenient features, the product comes with excellent reliability and conveniences as well. The product has been made up of some excellent quality, and it is very strong and sturdy as well. The precision bored and honed milling head, coupled with the hardened and ground 8” x 36” table ensures retention of tolerances, while locks on all moving surfaces increase user safety. The JET JVM-836 has features you’ve come to expect that are backed by the industry-leading JET Two Year Warranty

PROS CONS
High precision spindle bearings none
Large diameter quill is chromed
Over 10” of front to back ram travel
Precision bored and honed milling head

WEN 33013 4.5A Variable Speed

B07FCQ859M

This versatile 13-inch swing tool helps machinists and woodworkers alike create flat surfaces, straight holes, angled edges, slots, pockets, surface contours, and more. The R8 Taper allows for compatibility with a wide variety of cutters, mills, and bits, providing users a 1/2-inch drilling capacity, a 5/8 inch end mill capacity, and a 1-1/8 inch face mill capacity. Bevel the cutter head and column 45 degrees to either the left or the right. Variable speed operation goes anywhere from 100 to 1,100 RPM on the low setting and 100 to 2,500 RPM on the high setting to meet the needs of a wide range of material types.

PROS CONS
The included R8 spindle taper and a pre-installed drill chuck are useful features. Missing components – This machine does not come with collets ore a chuck key.
Variable speed goes anywhere from 100 to 1,100 RPM for versatile use.
You can bevel the head and column 45 degrees in either direction.
Versatile functionality

CONCLUSION

If you’ve come thus far, the possibility is that you might have seen a milling machine you like, if so, you shouldn’t hesitate in getting it. these tools are a must-have in your workshops. You should use this guide to pick the one that suits you best, you will be pleased you did.