Best Wire Stripping Machine 2021

It is unprofessional to use your teeth to cut open a wire. However, the professional way would be to use a wire stripping machine to cut open a wire. In this guide, we would be showing the best wire stripping machines one can buy. Another tool that is a must-have for professionals, especially automobile mechanics is the tire inflator.

So, if you are a professional, you will need to purchase one of these machines, read through to find the one that best suits you.

Unlike coping saws and circular saws, that cut through woods, These machines will strip wire down in record time while keeping the conductor in pristine condition; some can handle two wires at the same time and can strip wires of varying gauges.

You may want to have a look at welding tables. they are a must-have for every welder.

WHY USE A WIRE STRIPPING MACHINE?

There are a lot of reasons why you may want to strip a wire; some of the most pertinent reasons are mostly built upon reusing the bare conductor. At such a time manually removing the plastic coating can become a chore especially if the wire you are striping Is lengthy.

It can take hours upon hours to hand strip a long cable, which is why it is unproductive to go down that road. The most effective way to speed up the process is to invest in a wire stripping machine.

An effective wire stripping machine would get the job done in mere minutes, it will save you time and relieve you of stress.

While some of the automatic machines out they can be quite expensive, you can opt for a manual one for a lower price, a trade-off that will still prove to be time and stress efficient. These equipment are quite large, they can not be placed on a magnetic tool holder, due to their size

WIRE STRIPPING MACHINE BUYER’S GUIDE

Automatic vs Manual

As you may have noticed in our reviews, both automatic and manual wire stripping machines are very effective. In fact, there weren’t a whole lot of complaints about any of the products we included, regardless of whether they were automatic or manual.

So, it isn’t as if one is supremely better than the other from a performance perspective.

Automatic machines are obviously going to save you time but make sure it goes at a speed you’re comfortable with, just like comparing the normal conventional hammer, to air hammers. Any machine that goes about 50 feet per minute is good enough for home use. That said, if you’re comfortable using tools like this, there’s no reason not to get one that moves faster.

Obviously, the physical work of using an automatic is a lot less taxing. Manual tools require you to turn a hand crank to feed the wire through the blade which can be a pretty good workout. That said, some people prefer doing this kind of work themselves.

If you can’t decide, there are a few machines that can do both. We found an automatic machine that also has a hand crank so you can use it manually if you want to.

Or, some of the manual tools allow you to attach the crank to a power drill. When you turn the drill on, it will spin the blades and turn the machine into something a little more automatic.

Like we said, one isn’t better than the other, it’s really all in what you prefer.

Channels

There are 2 things to pay attention to when it comes to channels. One is how many there are and the other is how big they are. Some machines only have one hole with an adjustable channel and blades so it can accommodate just about any size wire.

Other machines will have a row of pre-cut channels where you feed the wire. It’s worth noting that, even with the multi-channel models, you still get some control. Usually, you can change the pressure to account for different coatings and insulations used on different types of wire.

Some are hard to cut through than others so this is an important feature to have if you’re working with a variety of material. However, tools like carpet shampooers and leaf shredders don’t cut through, they clean and shred respectively.

Blades

One of the most important things about blades is something we touched on already. You have to make sure they adjust. On high-end, automatic machines this will be done automatically. But, if you’re looking for something to use at home, there’s a good chance you’ll have to figure out how to do this manually.

Another thing to keep in mind about blades is that some of them are changeable and some are permanent. While permanent blades are really enticing because you won’t have to do as much maintenance, keep in mind that it’s not an easy job to get to them when it does come time to sharpen them.

Replaceable blades can be replaced easily but are not always easy to find and can end up being a bit of an expense.

Another tool that has a blade, but performs a different function from the wire stripping machine is the draw-knife.

Portability

This is another thing that is completely up to you. Manual machines tend to be more portable only because they’re very lightweight when compared to automatic machines. These are a good choice if you aren’t going to use it regularly and want something you can easily tuck in a closet or put on a shelf in your garage.

If you’re planning to mount your wire stripper to a workbench, there’s really no need to worry about portability. Most of the larger machines are really easy to mount and are too heavy to really be carried from place to place.

The Tool that Pays for Itself

If you have a lot of copper wire to strip, it’s true that the right wire stripping machine will end up stripping so much wire that it will completely offset the cost of the investment.

Some actually do so very quickly. So, choose the style that fits your needs and get busy. The sooner you start, the sooner your new tool will have paid for itself.

BEST WIRE STRIPPING MACHINES

NAMES FEATURES WHERE TO BUY
BestEquip Cable Wire Stripping Machine

B073LVX9PX

Mounts easily to any bench or work station. High-quality lightweight construction made of durable aluminum 

You can get copper wire after the single blades stripping. Recycle your copper wire, benefit from non-insulated pure copper wire 

This electric wire stripping machine is used for removing the plastic and rubber insulation from undamaged scrap wire

GET IT ON AMAZON
StripMeister Automatic Wire Stripping Machine

B00I9GJH9W

industrial grade

High quality

GET IT ON AMAZON
Manual Copper Wire Stripping Machine

B008I5QL0C

Output Limiter: Separate copper&jacket when pulling the wire through, all in 1 stroke. 

Input Guide: Wire gets straightened and aligned automatically. Good for kinked or tangled wires. 

Output Limiter: Separate copper&jacket when pulling the wire thru, all in 1 stroke. Double work speed

GET IT ON AMAZON
SST Industrial Wire Stripping Machine

B07BHVZ42R

Entails a Romex slot that ensures a perfect cut every time.

Comes with a 3-year warranty upon purchase.

GET IT ON AMAZON
Steel Dragon Tools WRA15 Benchtop Automatic

B00902Y2AS

High stripping speed

Durable build and lightweight

Portable and convenient

GET IT ON AMAZON
ECO-WORTHY Copper Wire Stripping Machine

B01MXDTKMW

Wire stripping range: Φ1.5mm–Φ25mm).

Channels: 1

Estimated strips/min: 450 inches/min.

The adjustable blade and rollers on the cable wire stripping machine are smooth and good for any shapes cable.

GET IT ON AMAZON
Steel Dragon Tools WRA35 Wire Stripper

B00NF0J0H6

Features emergency stop button.

Strips up to 1-1/2-inch wide (38 mm) round or flat cable.

Suitable for various kinds of round cable and sheath flat cable.

Features eight (8) round holes and two (2) flat stock cable cutting channels

GET IT ON AMAZON
Mophorn Computer Wire Stripping Tool

B076K9JN9D

Weight: 68 lbs

Max Wire Diameter: 3/4 in.

Motor: 110V

Channels: 1

Speed: 125 ft/min

GET IT ON AMAZON
Happybuy Cable Wire Stripping Machine

B071XSQTY4

heavy duty

Sharp blades

Portable

GET IT ON AMAZON
BLUEROCK Model WS-212 Wire Stripping Machine

B01EMK8GNQ

Weight: 200 lbs

Max Wire Diameter: 1 1/2 in.

Motor: 110V

Channels: 9

Speed: 75 ft/min

GVET IT ON AMAZON

BestEquip Cable Wire Stripping Machine

B073LVX9PX

You will not take long mounting this wire stripping machine on a bench or workstation. And this is because it is incredibly lightweight. Nevertheless, this does not mean the wire stripping machine is less durable. Well, it is made of long-lasting aluminum construction that gives it a reliable performance on a consistent basis. The stripping speed of this wire stripper ranges from 50 – 60 feet per minute, while the wire gauge range is from 0.06” – 0.98” in diameter. This wire stripper is very easy to use, convenient, portable, and saves energy.

PROS CONS
Can be mounted to any workstation Doesn’t work with large wires
Great for removing rubber insulation and plastic from the scrap wire
Very easy to operate

StripMeister Automatic Wire Stripping Machine

B00I9GJH9W

This StripMeister wire stripping machine is really unique. It is an industrial grade and it is able to strip down all sizes of wires from 18 gauge to 250MCM. Also, this wire stripping machine is really high quality. Plus, it even comes with an extra blade for free. This wire stripping machine has really good material and it is a good deal too.

PROS CONS
Easy to assemble and use Takes a bit to get used to
Numerous wire types supported
Fully automatic

Manual Copper Wire Stripping Machine

B008I5QL0C

Target Factory’s wire stripping machine has patented new features and has an output limiter that separates the copper and jacket when pulling the wire thru, all in one stroke. Also, it can double the work speed of an ordinary wire stripping machine. With this machine, the wires get straightened and aligned automatically especially for kinked or tangled wires. Moreover, with its EZ start cutter, you can get the copper out quickly and easily after the insulation is slit. This wire stripping machine product has three original blades that sharpened cutting surfaces at the perfect angles that combine sharpness and durability.

PROS CONS
Easy to setup None
Works well
Easy to use
Simple design
Very durable

SST Industrial Wire Stripping Machine

B07BHVZ42R

It is portable, saves energy, and very easy to use to help you get the desired results without sweating a lot. The machine promises to remove plastic and rubber insulation from undamaged wires with diameters that range from 0.12 inch to 1 inch. Furthermore, it measures 9.5-by-12.6-by-12.6 inches, which is an ideal size for any workstation. Its stripping speed is around 50 feet per minute; hence, expect zero delays.

And that’s not all, it features a tungsten steel blade that remains sharp throughout thousands of cut strips solid and stranded wire from 18 gauges up to 300MCM adjustable wires.

PROS CONS
3 years of warranty It will take a little to customize every wire size
Very powerful tungsten blade
Strips stranded and solid wires

Steel Dragon Tools WRA15 Benchtop Automatic

B00902Y2AS

The wire stripping machine here can connect to a drill for very fast automatic wire stripping. But you can also use it manually with the crank included here. Its wire capacity here is 4 mm to 25 mm. You will find it very dependable, durable, and useful.

PROS CONS
Supports all kinds of wires The design can be a bit better
Easy to mount
Can connect to a drill

ECO-WORTHY Copper Wire Stripping Machine

B01MXDTKMW

One of the best things about this ECO-WORTHY manual wire stripping machine is that it’s portable. At only 12.8 pounds, it’s easy to take it anywhere. The blades are completely enclosed for safety and it’s made of durable steel so it won’t get damaged easily. Adjustable blades and rollers accommodate just about any wire under 0.98 inches in diameter. Plus, if you want a little more power, you can connect it to your drill for more automatic functions.

PROS CONS
Easily mounts to any workbench none
Adjustable blades and rollers for any shaped cable
Easily connects to a drill for automatic cranking
All-steel construction will last a long time

Steel Dragon Tools WRA35 Wire Stripper

B00NF0J0H6

One of the interesting things about this machine from Steel Dragon Tools is that it can be used as an automatic or manual. Plus, it can handle just about anything because it features 8 round holes and 2 flat cable cutting channels as well as tension adjustment to tackle different coatings and insulation. The blades are fully enclosed for safety and there’s an emergency stop button if you should ever need it.

Steel Dragon Tools WRA35 is unique in that it’s an automatic machine that also gives you the option to use it manually. It’s really versatile and can handle just about any wire or insulation.

PROS CONS
Has 10 different channels in all The instruction manual isn’t very clear
Emergency stop button and enclosed blades for safety
An automatic machine that can also be used as a manual one

Mophorn Computer Wire Stripping Tool

B076K9JN9D

Many wire stripping machines are not made with inexperienced users in mind. Fortunately, that is not the case with this computer wire stripping tool from Mophorn. Its interface is direct and very easy to use to let you operate with less effort. Moreover, the wire stripper is computer-controlled, and this means it can strip wires automatically. With it, you will be able to meet any wire assembly required, considering that it has a variety of cutting style and programmable length. The machine performs well, and that’s why it’s used in industries such as electric appliances, motorcycle parts, auto, and electronic products.

PROS CONS
Versatile Can’t cut wires with diameters larger than about 3/4 inch
Adjustable
The programmable LCD screen makes it easy to get the settings right

Happybuy Cable Wire Stripping Machine

B071XSQTY4

Happybuy cable wire stripping machine has a solid aluminum alloy material that will last you for years. It also comes with sharp blades that do a very good job of stripping. In fact, its stripping speed is 60 feet per minute which are quite powerful.

Furthermore, this is a heavy-duty wire stripping machine. It is really reliable and safe to use too. Moreover, this wire stripping machine is really convenient since it is portable. You can easily move it around.

PROS CONS
Adjustable blades Requires constant blade adjustment
Flexible configuration
High powered electric motor for automatic stripping

BLUEROCK Model WS-212 Wire Stripping Machine

B01EMK8GNQ

The best thing about the BLUEROCK Model WS-212 is that is self-adjusts. That means that you don’t have to adjust the settings every time you change wire settings, which is a huge time saver. You can even cut 2 wires at the same time if you want. The user can adjust the tension to account for the jacket size which helps prolong the life of the blade. It’s designed to cut the tops and bottoms of large wire and the tops of smaller wire.

The BLUEROCK Model WS-212 is a heavy-duty automatic wire stripper. It’s great for a professional or anyone who always has a lot of wire to strip.

PROS CONS
Can cut 2 wires at the same time Much heavier than other options
Self-adjusts to different size wires Expensive
One of the fastest and effective models
Adjustable tension to extend the life of the blade

CONCLUSION

Whether you are a handyman, professional or you just want to try basic electrical work in your house, a quality wire-stripping machine can be handy. With the above-mentioned machines, you will be able to process any cable regardless of its thickness, as effortlessly and quickly as possible